|ISO Size||20FT ISO - 6058mm x 2438mm x 2591mm|
|Material Tank Body||Mild / Carbon Steel|
Approvals by Lloyd's Register, the Netherlands
Danteco Industries BV offers a new build production stationary bitumen tank 27,200-liter for sale and rental. Our stationary bitumen tank and bitutainer are high-performance storage tanks suitable for bitumen storage yet intermodal transport, short-sea, deep-sea shipping, inland waterways, rail transport, and road transport. Suitable storage and transportation, bitumen logistics, asphalt bitumen emulsion, heavy fuel oil (HFO), crude oil, and polymer-modified bitumen (PMB / PMBs). All Danteco bitutainers are of the highest quality in design and construction and meet the latest international approvals.
Please note that in certain exceptional cases, tank containers operated by Danteco Industries BV may have specifications that differ from the above descriptions.
Also, the cargo in the container must comply with the dimensional regulations and laws of the host country, which may affect the payload. For more information or assistance, please contact our office.
TYPE: 22H1/ 6058mm x 2438mm x 2591mm, 0.55 bar test pressure, double-walled (bundled) and SUPER insulated, baffle plates, flame pipe type (direct flame). The design allows for partial loads to be carried with baffle plates. **Also available with thermal-oil and electric heating system**
CAPACITY 28500-Litre / 27,5MT LOAD CAPACITY - TYPE: 22H1
6058mm x 2438mm x 2591mm, 0.55 bar test pressure, double skin (bunded) and highly insulated, baffled, flame tube type (direct fire), re-heating by LPG gas burner or diesel burner.
NOMINAL 28,5CBM VOLUME - LLOYDS REGISTER APPROVAL - SEA - ROAD AND RAIL TRANSPORT
|Nominal Capacity Tank||27200 LTR||(7185 US GALLONS) 5983 GALLONS|
|Maximum Gross Weight||34000 KG||74960 LBS|
|Tare||5800 KG||12786 LBS|
|Working Pressure||0.30 bar||4,35 psi|
|Test Pressure||0.55 bar||7,98 psi|
|Relief Valve Set Pressure||0.32 bar / -0.21 bar/vac||4,64 psi / -3 vac/psi|
|Bursting Disc Setting||0.35 bar||5,08 psi / -3 vac/psi|
|Ambient Temp. Range||-20°C to +65°C||-20°F up-to +149°F|
|Maximum Cargo Temp||200°C||392°F|
|Shell Material||Anti Corrosive CORTEN-A Steel SPA-H, B480, 3,0mm Double Wall Outer Corrugated 1,6mm|
|Design Code / Approvals||BS ISO668, ISO830, ISO1161, ISO1496-4(1991), CSC(2014), ISO6346, LRCCS(2014), TIR(1975), UIC(2010),|
|Man lid/Hatch Cover||500mm (20") diameter, 6 point fixing, 14mm x 12mm seal, located center.|
|Calibration||Volumetric chart, nominal capacity 28,340 liters available.|
|Airline / Vapor||40MM (11⁄2") ball valve, outlet 11⁄2" BSP, s/s screw cap.|
|Relief Valve||65MM (21⁄2") high flow flanged, operating pressure 0,22 bar. Capacity: 8710m3/hr.|
|Bursting Disc||DN80 (3") 0.35 bar (32 psi) setting.|
|Top Inlet||Blanked weld-in flange drilled 6 M12 holes @ 168 pcd, provision for optional fitting of 80mm (3") stainless steel butterfly valve. DN80, ASA 150 bolted blank flange outlet, 80mm (3") removable full-length syphon tube.|
|Bottom Discharge||Guard stainless steel 100MM 4" Ball valve - Outlet 3" BSP Flange with 3" Camlock Couplings and 3" Dust Cap.|
|Gaskets & Seals||Parts in contact with cargo, PTFE/Teflon.|
|Flame Tube Heating||Two (2) sets DN200 Φ159x6.0mm, Φ219x6.0mm, Burner Connections, incl. 2x protection sleeves inside the main flame tube.|
|Insulation||50MM (2") inorganic Rockwool (CFC free); Thermal Conductivity: ≤ 0.044 w/(m2.k), Bottom Insulation 150MM (6")|
|Document Holder / Earth||It is fitted rear end, suitable for shipping documents, MSDS, etc. Earth is located at the rear.|
|Data Plate / Markings||Stainless steel data plate detailing specifications fitted rear end.|
|Frame||The bitutainer container frame shall be mainly composed of an inner box type tank for bitumen, internal heating pipes, insulation, and nozzles, two (2) end frames, two (2) top side rails, two (2) bottom side rails, two (2) sidewalls and eight (8) corner fittings.|
|Ladder||They have intergraded at the front end.|
|Temperature Gauge||Analog gauge fitted rear end: -20°C to +300°C. / -4°F to +572°F.|
|Sensor Socket||1/2" BSP fitted rear end|
|Color RAL||9005 or custom|
Actual measurements and specifications may vary and are subject to confirmation.
Tank containers are supplied per the manufacturer's (Danteco Industries BV) general trading terms and conditions.
Longkou Xinlong Machinery Equipment Co., Ltd. is a container Lashing Equipment & Cargo Securing Devices manu...Show More
Hydrogen Peroxide - H2O2 Tank T14 is a tank suitable for the carriage of peroxide and high hazardous cargoes. Hy...Show More
A Swap Tank (Swap Body) has a larger tank than the frame; usually, 23 or 25 feet (7.01 or 7.62 meters) long...Show More
© COPYRIGHT 2022 - DANTECO INDUSTRIES BV