SPECIALISTS IN TANK CONTAINERS
Hot Water Storage ISO Tank Hot Water Storage ISO Tank Hot Water Storage ISO Tank Hot Water Storage ISO Tank Hot Water Storage ISO Tank Hot Water Storage ISO Tank Hot Water Storage ISO Tank Hot Water Storage ISO Tank Hot Water Storage ISO Tank Hot Water Storage ISO Tank Hot Water Storage ISO Tank
Stock Upon request
ISI Size 20FT ISO - 6058mm x 2438mm x 2591mm
Materials Barrel Stainless Steel 430

Do you need a quick and significant volume of hot boiling water at your frac site, well site, or oilfield?
Our 20FT Double Wall Hot Water Storage Tank, temperature controlled, is designed to deliver that on-site!
The Hot Water Storage Tank is heated by two big (190KW each) diesel burners, and you can produce the hot boiling water at any remote location.

The 20ft hot water storage tank can be divided into five purposes: storage, short-sea, deep-sea shipping, rail transport, and road transport. Danteco Industries BV offers a hot water storage tank for direct sales.

The units are also suitable for storage, transportation, and logistics of bitumen, asphalt bitumen emulsion, heavy fuel oil (HFO), and heavy crude oil.

All Danteco bitutainer-like / bitumen box containers are of the highest quality design and construction and conform strictly to the latest international approvals.

Please note that in certain exceptional cases, the containers operated by Danteco Industries BV may have specifications that differ from the descriptions above. Also, cargo in a container must conform to the dimensional regulations and laws stipulated by the host country; thus, payload capacity may be affected. For more information or assistance, please get in touch with our customer service.

TYPE: 22H1/ 6058mm x 2438mm x 2591mm, 0.55 bar test pressure, double skin (bunded) and super-insulated, flame tube type (direct fire). The design allows partial payloads to be carried, fitted with baffle plates. **Also available with thermal-oil and electrical heating system**

  • Capacity: 28500L / (7530 US Gallons) 6270 Gallons Imp. 
  • 20FT ISO Bitutainer Tank Design CSC Approved
  • Design temp. -40°C up-to +200°C / -40°F up-to +392°F
  • Internal tank for hot water and internal heating pipes are made of stainless-steel S.S(430 or equ.)
  • Custom modifications original design are possible. (including various nozzle connections front & rear)
  • Unique high surface flame tube design (direct fire)
  • 3" and 4" outlet Bottom Discharge 100MM Ball valve includes 3" outlet with 3inch Cam-Lock coupling (male) & dust cap
  • Heavy Insulated 100mm~150mm where possible

SPECIFICATION: HOT WATER STORAGE ISO TANK - 20FT ISO

CAPACITY 28500-Litre - TYPE: 22H1

6058mm x 2438mm x 2591mm, 0.55 bar test pressure, double skin (bunded) and super-insulated, baffled, flame tube type (direct fire), re-heating by LPG gas burner or diesel burner.

NOMINAL 28,5 CBM VOLUME - LLOYDS REGISTER APPROVAL - SEA - ROAD AND RAIL TRANSPORT

Dimensions:
  Metric Imperial
Nominal Capacity Tank 28500 LTR (7530 US GALLONS) 6270 GALLONS
Maximum Gross Weight 34000 KG 74960 LBS
Tare 6050 KG 13340 LBS
Construction:
Working Pressure 0.30 bar 4,35 psi
Test Pressure 0.55 bar 7,98 psi
Relief Valve Set Pressure 0.32 bar / -0.21 bar/vac 4,64 psi / -3 vac/psi
Bursting Disc Setting 0.35 bar 5,08 psi / -3 vac/psi
 
Ambient Temp. Range -20°C to +65°C -20°F up-to +149°F
Maximum Cargo Temp 200°C 392°F
Shell Material Anti Corrosive CORTEN-A Steel SPA-H, B480, 3,0mm Double Wall Outer Corrugated 1,6mm / Inner Tank Stainless steel 430
Design Code / Approvals BS ISO668, ISO830, ISO1161, ISO1496-4(1991), CSC(2014), ISO6346, LRCCS(2014), TIR(1975), UIC(2010),
Standard Fittings:
Man lid/Hatch Cover 500mm (20") diameter, 6 point fixing, 14mm x 12mm seal, located center.
Calibration Volumetric chart, nominal capacity 28,340 liters available.
Airline / Vapor 40MM (11⁄2") ball valve, outlet 11⁄2" BSP, s/s screw cap.
Relief Valve 65MM (21⁄2") high flow flanged, operating pressure 0,22 bar. Capacity: 8710m3/hr.
Bursting Disc DN80 (3") 0.35 bar (32 psi) setting.
Top Inlet Blanked weld-in flange drilled 6 M12 holes @ 168 pcd, provision for optional fitting of 80mm (3") stainless steel butterfly valve. DN80, ASA 150 bolted blank flange outlet, 80mm (3") removable full-length syphon tube.
Bottom Discharge Guard stainless steel 100MM 4" Ball valve - Outlet 3" BSP Flange with 3" Camlock Couplings and 3" Dust Cap.
Gaskets & Seals Parts in contact with cargo, PTFE/Teflon.
Flame Tube Heating Two (2) sets DN200 Φ159x6.0mm, Φ219x6.0mm, Burner Connections, incl. 2x protection sleeves inside the main flame tube.
Insulation 50MM (2") inorganic Rockwool (CFC free); Thermal Conductivity: ≤ 0.044 w/(m2.k), Bottom Insulation 150MM (6")
 
Document Holder / Earth It is fitted rear end, suitable for shipping documents, MSDS, etc. Earth is located at the rear.
Data Plate / Markings Stainless steel data plate detailing specifications fitted rear end.
Frame The hot water tank container frame shall be mainly composed of an inner box type tank for bitumen, internal heating pipes, insulation, and nozzles, two (2) end frames, two (2) top side rails, two (2) bottom side rails, two (2) sidewalls and eight (8) corner fittings.
Ladder They have intergraded at the front end.
Temperature Gauge Analog gauge fitted rear end: -20°C to +300°C. / -4°F to +572°F.
Sensor Socket 1/2" BSP fitted rear end
Color RAL 9005 or custom

Actual measurements and specifications may vary and are subject to confirmation. 
Tank containers are supplied per the manufacturer's (Danteco Industries BV) general trading terms and conditions.

Related Products

Container Lashing Equipment & Cargo Securing Devices

Container Lashing Equipment & Cargo Securing Devices

Longkou Xinlong Machinery Equipment Co., Ltd. is a container Lashing Equipment & Cargo Secu...

Show More
ISO Tank Parts

ISO Tank Parts

Guard Technology Co. Ltd. China.
From our Guard Europe BV warehouse in Bergschenhoek, the Netherlands, we...

Show More
ISO Powder Tank Container

ISO Powder Tank Container

International statutory authorities approve the pneumatic-operated cement tank with the danteco aeration system ...

Show More
Bitumen Tank Thermal-Oil

Bitumen Tank Thermal-Oil

Danteco supplies a 25,000-litre bitumen tank 20FT ISO bulk with a thermal-oil heating system for PMB bitume...

Show More