|ISO Size||20FT ISO - 6058mm x 2438mm x 2591mm|
|Material Tank Body||Mild / Carbon Steel|
Pneumatic operated Cement Tank for bulk powder cement is approved by international statutory authorities to safely transport bulk cement, limestone, and fly ash powder products. Danteco Industries BV supplies various designs of the bulk 20FT bulk cement tank. Our cement tank is separated for four purposes: tank containers for cement storage, short-sea, deep-sea shipping, and rail transportation.
The tank containers are suitable for transporting bulk cement, limestone, fly ash, or coal powder by rail, road, and ship. All materials used in the construction shall withstand extremes of temperature ranging from -19ºC to +80ºC / -2,2ºF to +176ºF without affecting the strength of the container.
All Danteco tank containers are of the highest quality design and construction and conform strictly to the latest international approvals.
Please note that in certain exceptional cases, the containers operated by Danteco may have specifications that differ from the descriptions above.
Also, cargo in the container must conform to the dimensional regulations and laws stipulated by the host country; thus, payload capacity may be affected. For more information or assistance, please contact our office.
6058mm x 2438mm x 2591mm, 3.3 bar test pressure
Year manufactured: new build
|Loading Capacity||22500 LTR||(5943 US GALLONS) 4950 GALLONS|
|Volume Capacity||26000 LTR||(6868 US GALLONS) 5719 GALLONS|
|Maximum Gross Weight||32000 KG||70548 LBS|
|Tare||4200 KG||9260 LBS|
|Working Pressure||2.2 bar||32 psi|
|Test Pressure||3.3 bar||48 psi|
|Relief Valve Set Pressure||2.2 bar / -0.21 bar/vac||32 psi / -3 vac/psi|
|Ambient Temp. Range||-19°C up to +80°C||-2,2°F up to +176°F|
|Maximum Cargo Temp||80°C||176°F|
|Shell Material||Dia. 2400mm Cylindrical Shell Mild Steel Q345B, 4,5 mm shell, 5,0 mm dish ends.|
|Design Code / Approvals||ASME, Section VIII, Division 1 where applicable and TIR, C.S.C., ISO/TC - 104, ISO668, ISO6346, ISO830, ISO1496/3(Edt1995), ISO1161, CCS. (China Classification Society).|
|Manlid||500mm (20") diameter, 6 point fixing, 14mm x 12mm seal, located centre.|
|Air Source pressure||0.2~0.3 Mpa.|
|Air Supply||≥8 m3/min.|
|Air-inlet diameter||100mm cam lock type joint.|
|Outlet diameter||4" male adaptor.|
|The average speed of discharge (conveying cement to the place 30m high, 30m far)||Cement: 1.0~1.5 t/min.|
|Remnant Ratio||% cement: ≤0.3 (Cement: Not more than 100kg).|
|Gaskets & Seals||Parts in contact with cargo, PTFE/Teflon.|
|Pipe System||The dry compressed airflow via a 100 mm cam-lock type joint enters into the main pipe
with a 2.5" one-way valve, a 2" safety valve, 1/2"safety valve, and a pressure gauge, then goes into two air cavities at each side of the inside of the tank through two branch pipes which separately connected to the tank and main pipe. Another airflow goes through a 1" ball valve and a 1" one-way valve into the unloading pipe to speed up unloading cement. The diameter of the main pipe is 76mm, and the branch pipe is 57mm.
|Unloading pipe||4" steel pipe. One discharge butterfly valve and one 4" male adaptor are fixed on the discharge pipe.|
|Document Holder / Earth||Fitted @ the rear end, suitable for shipping documents, MSDS, etc. Earth is located at the rear.|
|Data Plate / Markings||Stainless steel data plate detailing specifications fitted rear end.|
|Frame||The frame comprises front and rear-ends frames, top and bottom. Each end frame is constructed by two (2) corner posts, top and bottom end rails, and four (4) thick diagonal corner plates.
Side rails, two (2) barrel supports, two (2) saddles, and eight (8) corner fittings.
|Walkway||400MM-wide non-slip steel. One longitudinal walkway and three short transverse walkways at the front and rear and adjacent to the rear of the manhole’s spill box. Steel-nets walkways galvanized to 10un thickness.|
|Handrail||(Optional) Intergraded at the top rail|
Actual measurements and specifications may vary and are subject to confirmation.
Tank containers are supplied per the manufacturer's (Danteco Industries BV) general trading terms and conditions.
Danteco supplies 25,000-litre 20FT HC (high-cube) ISO bulk bitumen tank containers with a thermal-oil heating sy...Show More
Danteco offers T11 Type 10FT Offshore Tank Containers in various capacities. Offshore Chemical Tank Containers a...Show More
Since 2000, Danteco has been modifying standard T-code ISO tank containers to rebuild bitumen tanks in Rotterdam...Show More
© COPYRIGHT 2022 - DANTECO INDUSTRIES BV