|ISO Size||10FT ISO - 2991mm x 2438mm x 2591mm|
|Material Tank Body||Stainless Steel 316L|
Approvals by Lloyd's Register, the Netherlands
Danteco offers T11 Type 10FT Offshore Tank Containers in various capacities. Offshore Chemical Tank Containers are approved by international statutory authorities for the safe transportation of various chemical General Purpose Liquids.
Tank containers are separated for two transportation purposes: tank containers for liquid chemical products and storage.
Offshore Chemical Tank Containers are approved by international statutory authorities for the safe transportation of various chemical General Purpose Liquids.
As permitted in the IMDG, ADR/RID for a UN portable Tank T11 Type
The vessel's operator must ensure that the commodity carried is listed under the applicable UN Portable Tank instruction and is in no way corrosive to 316/316L Stainless Steel.
The framework acts as a ladder on all four sides. The tank top is fully enclosed for operators' safety and to prevent chains or slings from snagging.
|NOMINAL||ACTUAL||L x W x H mm||KGS||KGS||KGS|
|500 imp. Gals||2400 Litres||2150x1900x2050||1600||5400||7000|
|600 imp. Gals||2870 Litres||2150x1900x2250||1800||5200||7000|
|1000 imp. Gals||4800 Litres||3048x1900x2250||2400||7600||10000|
|2000 imp. Gals||9200 Litres||2900x2400x2750||2200||12800||15000|
OFFSHORE TANK: 1000 Gallons / 4542 Litre UN Portable Tank T11 TYPE
2750mm x 1850mm x 2470mm, General Purpose Chemical Tank Container,
Standard DNV 2.7-1, EN12079 Horizontal Tank in Rectangular Frame, 6.0 bar test pressure
|Capacity Tank||4542 LTR||1200 (US GALLON) 1000 GALLON|
|Maximum Gross Weight||10500 KG||231497 LBS|
|Tare||2400 KG||5291 LBS|
|Working Pressure||4.0 bar||58 psi|
|Test Pressure||6.0 bar||87 psi|
|Steam Working Pressure||4.0 bar||58 psi|
|Steam Test Pressure||6.0 bar||87 psi|
|Relief Valve Set Pressure||4.4 bar||63 psi|
|Design Temp. Range||-40°C to +50°C||-40°F to +149°F|
|Maximum Cargo Temp||50°C||248°F|
|Shell Material||Stainless steel, ASTM A240 316 / 316L low carbon <0.03% DIN 17441 w1.4401. Cold rolled shell 2B finish. By regulations, the thickness is a nominal 4.4mm shell +0.1 corrosion allowance, 5.0 b/f forming ends, and equivalent 6mm mild steel.|
|Design Code / Approvals||ASME VIII DIV 1., IMDG, ADR/RID, DNV 2.7-1, EN 12079.|
|Manlid||1 x 460mm – 6-point fastening with TIR provision. c/w Swingbolts.|
|Vent Connection||3⁄4” BSP vent connection consisting of 3/4” BSP Weld in socket c/w 3⁄4” 316 S/S BSP elbow, 3⁄4” S/S Barrel nipple, 3⁄4” BSP Ball valve c/w a BSP Cap|
|Relief Valve||1 x 2 1⁄2” Super Maxi Highflow pressure vacuum relief valve, c/w flame gauze, Set pressure 4.4 bar, Set vacuum 0.21 bar.|
|Vent Connection||3⁄4” BSP vent connection consisting of 3/4” BSP Weld in socket c/w 3⁄4” 316 S/S BSP elbow, 3⁄4” S/S Barrel nipple, 3⁄4” BSP Ball valve c/w a BSP Capremovable full-length syphon tube.|
|Top Lid||One piece and made from mild steel galvanized grating.|
|Bottom Discharge Outlet||1 x 3” 45 Deg High-Lift Bottom Outlet Assembly, c/w 2” Ball-valve and 2” BSP Outlet Flange c/w 1 x 3⁄4” sample valve c/w extension pipe, 3⁄4” ball valve, c/w cap, and chain.|
|Gaskets & Seals||Parts in contact with cargo, PTFE/Teflon.|
|Padeyes||∅29 mm hole for 8.5-tonne shackle (Designed for 45-degree Sling angle).|
|Document Holder||2” carbon steel tube is 250 mm long welded to Cradle and fitted with a rubber cap with captivating wire.|
|Earthing Point||Earth located at the rear, two off Earthing boss, 316L Stainless with M16 thread.|
|Data Plate / Markings||To code and TIR requirements. (to be located on the Bottom Outlet side of the Tank)|
|Forklift Pockets||250mm x 150mm x 8mm Carbon Steel, with 1164mm between centers, c/w slots|
|Walkway / Grating||To adequately cover all exposed fittings and prevent slings or chains from snagging per DNV 2.7-1. Made from mild steel galvanized grating.|
|Lader||Located on outlet end, RHS. Anti-slip paint or tape is applied to the top surfaces of rungs.|
|Temperature Gauge||80mm dia dual scale -20°C to 100°C / 0 to 200°F|
|Level Gauge||Available upon request.|
Actual measurements and specifications may vary and are subject to confirmation.
Tank containers are supplied per the manufacturer's (Danteco Industries BV) general trading terms and conditions.
Danteco has a long history of supplying flexible metal bitumen hose for its bitumen container and bitumen t...Show More
Danteco supplies 25,000-liter 20FT HC (high-cube) ISO bulk bitumen tank containers with pair (two) flame tu...Show More
Danteco supplies 25,000-litre ISO bulk bitumen tank containers. Our bitumen tank containers are separated for fo...Show More
© COPYRIGHT 2022 - DANTECO INDUSTRIES BV