SPECIALISTS IN TANK CONTAINERS
Dry Bulk Powder Tank Container Dry Bulk Powder Tank Container Dry Bulk Powder Tank Container Dry Bulk Powder Tank Container Dry Bulk Powder Tank Container Dry Bulk Powder Tank Container Dry Bulk Powder Tank Container Dry Bulk Powder Tank Container Dry Bulk Powder Tank Container Dry Bulk Powder Tank Container
Stock Upon request
ISO Size 20FT ISO - 6058mm x 2438mm x 2591mm
Material Tank Body Mild / Carbon Steel

Dry Bulk Powder Tank Container (pneumatically operated) for bulk powder is approved by international statutory authorities to safely transport bulk cement, limestone, and fly ash. It is designed with a unique frame featuring reinforced forklift pockets. This striking frame is beneficial at depots or locations where no regular container-lifting truck with a spreader is available. Danteco Industries BV supplies various designs of the dry bulk powder tank. Our dry bulk powder tank is separated into four purposes: tank containers for dry bulk cement storage, short-sea shipping, deep-sea shipping, and rail transportation.

The tank containers are suitable for transporting bulk cement, limestone, fly ash, or coal powder by rail, road, and ship. All materials used in the construction shall withstand temperature extremes ranging from -19 ºC to +80 ºC / -2,2 ºF to +176 ºF without affecting the container's strength.
All Danteco tank containers are of the highest quality in design and construction and strictly conform to the latest international approvals.

Please note that in certain exceptional cases, the containers operated by Danteco may have specifications that differ from the descriptions above.
Also, cargo in the container must comply with the host country's dimensional regulations and laws; thus, payload capacity may be affected. For more information or assistance, please get in touch with our office.

  • Reinforced Forklift Pockets
  • 20.000 Liter Loading capacity
  • 25.000 KG Loading weight
  • Max. Gross Weight 29,000 kg
  • 20FT ISO Full Frame Design
  • Design temp. -19 ºC to +80 ºC / -2,2 ºF to +176 ºF
  • Air source operating pressure 2~2,5 bar / 0.20~0.25 MPa
  • 4" Cam-Lock male adaptor
  • Approvals by CCS

DRY BULK POWDER CEMENT TANK CONTAINER - REINFORCED FORKLIFT SOCKETS -  20FT ISO

6058mm x 2438mm x 2591mm, 3.3 bar test pressure
Year manufactured: new build

Dimensions:
  Metric Imperial
Loading Capacity 20000 LTR (5283 US GALLONS) 4399 GALLONS
Volume Capacity 23000 LTR (6075 US GALLONS) 5059 GALLONS
Maximum Gross Weight 29000 KG 63934 LBS
Tare 4000 KG 8819 LBS
Construction:
Working Pressure 2.2 bar 32 psi
Test Pressure 3.3 bar 48 psi
Relief Valve Set Pressure 2.2 bar / -0.21 bar/vac 32 psi / -3 vac/psi
Ambient Temp. Range -19°C up to +80°C -2,2°F up to +176°F
Maximum Cargo Temp 80°C 176°F
Shell Material Dia. 2400 mm cylindrical shell, mild steel Q345B, 4,5 mm shell, 5,0 mm dish ends.
Design Code / Approvals ASME, Section VIII, Division 1 where applicable and TIR, C.S.C., ISO/TC - 104, ISO668, ISO6346, ISO830, ISO1496/3(Edt1995), ISO1161, CCS. (China Classification Society).
Standard Fittings:
Manlid 500mm (20") diameter, 6-point fixing, 14mm x 12mm seal, located in the center.
Air Source pressure 0.2~0.25 Mpa.
Air Supply ≥8 m3/min.
Air-inlet diameter 100mm cam lock type joint.
Outlet diameter 4" male adaptor.
The average speed of discharge (conveying cement to the place 30m high, 30m far) Cement: 1.0~1.5 t/min.
Remnant Ratio % cement: ≤0.3 (Cement: Not more than 100kg).
Gaskets & Seals Parts in contact with cargo, PTFE/Teflon.
Pipe System The dry compressed airflow via a 100 mm cam-lock type joint enters the main pipe
with a 2.5" one-way valve, a 2" safety valve, 1/2"safety valve, and a pressure gauge, then goes into two air cavities at each side of the inside of the tank through two branch pipes which separately connected to the tank and main pipe. Another airflow passes through a 1" ball valve and a 1" one-way valve into the unloading pipe to speed up the unloading of cement. The diameter of the main pipe is 76mm, and the branch pipe is 57mm.
Unloading pipe 4" steel pipe. One discharge butterfly valve and one 4" male adaptor are fixed on the discharge pipe.
Document Holder / Earth Fitted @ the rear end, suitable for shipping documents, MSDS, etc. Earth is located at the rear.
Data Plate / Markings Stainless steel data plate detailing specifications fitted to the rear end.
Frame The frame comprises front and rear ends tand op and bottom. Each end frame is constructed by two (2) corner posts, top and bottom end rails, and four (4) thick diagonal corner plates.
Side rails, two (2) barrel supports, two (2) saddles, and eight (8) corner fittings.
Walkway 400MM-wide non-slip steel. One longitudinal walkway and three short transverse walkways at the front and rear, adjacent to the spill box of the maintenance hole. Steel-net walkways galvanized to 10un thickness.
Handrail (Optional) Integrated at the top rail

Actual measurements and specifications may vary and are subject to confirmation. 
Tank containers are supplied in accordance with the manufacturer's (Danteco Industries B.V.) general trading terms and conditions.

Related Products

Hot Water Storage ISO Tank

Hot Water Storage ISO Tank

Do you need a quick, significant volume of hot, boiling water at your frac site, well site, or oilfield?
Ou...

Show More
20FT Reefer Tank

20FT Reefer Tank

The Ultimate Guide to Reefer Tank Containers: Your Best Choice for Temperature-Controlled Transport

...

Show More
Swap Tank Container

Swap Tank Container

A Swap Tank (Swap Body) has a larger tank than the frame; it is usually 23 or 25 feet (7.01 or 7.62 meters)...

Show More
Cement Tank Container

Cement Tank Container

Pneumatic-operated cement tank for bulk powder cement is approved by international statutory authorities to...

Show More