45FT Bitumen Storage Tank Stationary 45FT Bitumen Storage Tank Stationary 45FT Bitumen Storage Tank Stationary 45FT Bitumen Storage Tank Stationary 45FT Bitumen Storage Tank Stationary 45FT Bitumen Storage Tank Stationary 45FT Bitumen Storage Tank Stationary 45FT Bitumen Storage Tank Stationary
Stock Upon request
ISO Size 45 FT HC/PW ISO - 13716mm x 2500mm x 2896mm
Material Tank Body Mild / Carbon Steel

Danteco Industries BV offers a new build stationary bitumen storage tank 80,000-liter for sale and rental. Our stationary bitumen storage tank and bitu-container are high-performance storage tanks suitable for bitumen storage yet suitable for empty intermodal transport, short-sea, deep-sea shipping, inland waterways, rail transport, and road transport. Suitable storage and transportation, bitumen logistics, asphalt bitumen emulsion, heavy fuel oil (HFO), crude oil, and polymer-modified bitumen (PMB / PMBs). All Danteco bitutainers are of the highest quality in design and construction and meet the latest international approvals.

Please note that in certain exceptional cases, tank containers operated by Danteco Industries BV may have specifications that differ from the above descriptions.

Also, the cargo in the container must comply with the dimensional regulations and laws of the host country, which may affect the payload. For more information or assistance, please contact our office.

TYPE: LEBO/ 13716mm x 22500mm x 2896mm, 0.55 bar test pressure, double-walled (bundled) and SUPER insulated, baffle plates, 2 pairs (double) flame pipe type (direct flame) front & rear bitu-container.  **Also available with thermal-oil and electric heating system**

  • Capacity: 80m3 / 80000L / (21133 US Gallons) 17597 Gallons Imp. 
  • Bitumen Tank Stationary Design CSC Approved
  • Design temp. -40°C up-to +200°C / -40°F up-to +392°F
  • Tara Weight 13200KG
  • Two Pairs Flame Tube Design (direct fire) (front and rear bitu-container)
  • 3" and 4" outlet Guard Brand Bottom Discharge 100MM / DN100) Ball valve includes 3" outlet with 3inch Cam-Lock coupling (male) & dust cap
  • "SUPER" Insulated 150mm
  • Approvals by Lloyd's Register, the Netherlands



13716mm x 2500mm x 2896mm, 0.55 bar test pressure, double skin (bunded) and highly insulated, baffled, two-pairs flame tube type (direct fire), re-heating by LPG gas burner or diesel burner.


This specification will cover the design, construction, materials, testing, and inspection performances of 45' x 2500mm x 9'6" burner heating type steel bitumen storage container.

  Metric Imperial
Nominal Capacity Tank 80000 LTR (21133 US Gallons) 17597 Gallons Imp.
Maximum Gross Weight 92200 KG 203266 LBS
Tare 13200 KG 29101 LBS
Working Pressure 0.30 bar 4,35 psi
Test Pressure 0.55 bar 7,98 psi
Relief Valve Set Pressure 0.32 bar / -0.21 bar/vac 4,64 psi / -3 vac/psi
Bursting Disc Setting 0.35 bar 5,08 psi / -3 vac/psi
Ambient Temp. Range -20°C to +65°C -20°F up-to +149°F
Maximum Cargo Temp 200°C 392°F
Shell Material Anti Corrosive CORTEN-A Steel SPA-H, B480, 3,0mm Double Wall Outer Corrugated 1,6mm
Design Code / Approvals BS ISO668, ISO830, ISO1161, ISO1496-4(1991), CSC(2014), ISO6346, LRCCS(2014), TIR(1975), UIC(2010),
Standard Fittings:
Man lid/Hatch Cover 500mm (20") diameter, 6 point fixing, 14mm x 12mm seal, located center.
Calibration Volumetric chart, nominal capacity 28,340 liters available.
Airline / Vapor 40MM (11⁄2") ball valve, outlet 11⁄2" BSP, s/s screw cap.
Relief Valve 65MM (21⁄2") high flow flanged, operating pressure 0,22 bar. Capacity: 8710m3/hr.
Agitator Connection Upon request
Top Inlet Blanked weld-in flange drilled 6 M12 holes @ 168 pcd, provision for optional fitting of 80mm (3") stainless steel butterfly valve. DN80, ASA 150 bolted blank flange outlet, 80mm (3") removable full-length syphon tube.
Bottom Discharge Guard stainless steel 100MM 4" Ball valve - Outlet 3" BSP Flange with 3" Camlock Couplings and 3" Dust Cap.
Gaskets & Seals Parts in contact with cargo, PTFE/Teflon.
Flame Tube Heating Two pair (4) sets DN200 Φ159x6.0mm, Φ219x6.0mm, Burner Connections, incl. 2x protection sleeves inside the main flame tube.
Insulation 50MM (2") inorganic Rockwool (CFC free); Thermal Conductivity: ≤ 0.044 w/(m2.k), Bottom Insulation 175MM (6")
 Earth Earth is located at the rear.
Data Plate / Markings Stainless steel data plate detailing specifications fitted rear end.
Frame The bitutainer container frame shall be mainly composed of an inner box type tank for bitumen, internal heating pipes, insulation, and nozzles, two (2) end frames, two (2) top side rails, two (2) bottom side rails, two (2) sidewalls and eight (8) corner fittings.
Ladder They have intergraded at the front end.
Temperature Gauge Analog gauge fitted rear end: -20°C to +300°C. / -4°F to +572°F.
Sensor Socket 1/2" BSP fitted rear end
Color RAL 9005 or custom

Actual measurements and specifications may vary and are subject to confirmation. 
Tank containers are supplied per the manufacturer's (Danteco Industries BV) general trading terms and conditions.

Related Products

Bitumen Tank Thermal-Oil

Bitumen Tank Thermal-Oil

Danteco supplies a 25,000-litre bitumen tank 20FT ISO bulk with a thermal-oil heating system for PMB bitume...

Show More
20FT T50 LPG Gas Tank Container

20FT T50 LPG Gas Tank Container

For Propane, LPG, and Anhydrous Ammonia, Danteco offers a full range with various pressure ratings of new and us...

Show More
Dry Bulk Powder Tank Container

Dry Bulk Powder Tank Container

Dry Bulk Powder Tank Container (pneumatically operated) for bulk powder is approved by international statutory a...

Show More
ISO Pneumatic Tank

ISO Pneumatic Tank

International statutory authorities approve the pneumatic-operated cement tank with the danteco aeration system ...

Show More