SPECIALISTS IN TANK CONTAINERS
Bitutainer Bitutainer Bitutainer Bitutainer Bitutainer Bitutainer Bitutainer Bitutainer
Stock Upon request
ISO Size 20FT ISO - 6058mm x 2438mm x 2591mm
Material Tank Body Mild / Carbon Steel

Our bitutainers (bitumen box containers) can be divided into five purposes: bitumen containers for bitumen storage, short-sea, deep-sea shipping, rail transport, and road transport. Danteco Industries BV offers new and used bitutainer 28,500 liters/volume bitumen box containers for direct sales and long en short leasing. Suitable for storage, transport, and logistics of bitumen, asphalt bitumen emulsion, heavy fuel oil (HFO), heavy crude oil, and polymer-modified bitumen (PMB / PMBs).

All Danteco bitutainer(s) - bitumen box containers are of the highest quality design and construction and conform strictly to the latest international approvals.

Please note that in certain exceptional cases, the containers operated by Danteco Industries BV may have specifications that differ from the descriptions above. Also, cargo in a container must conform to the dimensional regulations and laws stipulated by the host country; thus, payload capacity may be affected. For more information or assistance, please get in touch with our customer service.

TYPE: 22H1/ 6058mm x 2438mm x 2591mm, 0.55 bar test pressure, double skin (bunded) and highly insulated, flame tube type (direct fire). The design allows partial payloads to be carried, fitted with baffle plates. **Also available with thermal-oil and electrical heating system**

  • Capacity: 28500L / (7530 US Gallons) 6270 Gallons Imp. 
  • High Payload Capacity 27,5MT Metric tonne loading capacity = optimal load per container
  • 20FT ISO Bitutainer Tank Design CSC Approved
  • Design temp. -40°C up-to +200°C / -40°F up-to +392°F
  • Flame Tube Design (direct fire)
  • 3" and 4" outlet Bottom Discharge 100MM Ball valve includes 3" outlet with 3inch Cam-Lock coupling (male) & dust cap
  • Heavy Insulated 50mm~150mm where possible
  • Approvals by Lloyd's Register, the Netherlands

SPECIFICATION: BITUTAINER - BITUMEN BOX CONTAINER - BITUTANK - BITUBOX - 20FT 40FT 45FT ISO

CAPACITY 28500-Litre / 27,5MT LOAD CAPACITY - TYPE: 22H1

6058mm x 2438mm x 2591mm, 0.55 bar test pressure, double skin (bunded) and highly insulated, baffled, flame tube type (direct fire), re-heating by LPG gas burner or diesel burner.

NOMINAL 28,5CBM VOLUME - LLOYDS REGISTER APPROVAL - SEA - ROAD AND RAIL TRANSPORT

Dimensions:
  Metric Imperial
Nominal Capacity Tank 28500 LTR (7530 US GALLONS) 6270 GALLONS
Maximum Gross Weight 34000 KG 74960 LBS
Tare 6050 KG 13340 LBS
Construction:
Working Pressure 0.30 bar 4,35 psi
Test Pressure 0.55 bar 7,98 psi
Relief Valve Set Pressure 0.32 bar / -0.21 bar/vac 4,64 psi / -3 vac/psi
Bursting Disc Setting 0.35 bar 5,08 psi / -3 vac/psi
 
Ambient Temp. Range -20°C to +65°C -20°F up-to +149°F
Maximum Cargo Temp 200°C 392°F
Shell Material Anti Corrosive CORTEN-A Steel SPA-H, B480, 3,0mm Double Wall Outer Corrugated 1,6mm
Design Code / Approvals BS ISO668, ISO830, ISO1161, ISO1496-4(1991), CSC(2014), ISO6346, LRCCS(2014), TIR(1975), UIC(2010),
Standard Fittings:
Man lid/Hatch Cover 500mm (20") diameter, 6 point fixing, 14mm x 12mm seal, located center.
Calibration Volumetric chart, nominal capacity 28,340 liters available.
Airline / Vapor 40MM (11⁄2") ball valve, outlet 11⁄2" BSP, s/s screw cap.
Relief Valve 65MM (21⁄2") high flow flanged, operating pressure 0,22 bar. Capacity: 8710m3/hr.
Bursting Disc DN80 (3") 0.35 bar (32 psi) setting.
Top Inlet Blanked weld-in flange drilled 6 M12 holes @ 168 pcd, provision for optional fitting of 80mm (3") stainless steel butterfly valve. DN80, ASA 150 bolted blank flange outlet, 80mm (3") removable full-length syphon tube.
Bottom Discharge Guard stainless steel 100MM 4" Ball valve - Outlet 3" BSP Flange with 3" Camlock Couplings and 3" Dust Cap.
Gaskets & Seals Parts in contact with cargo, PTFE/Teflon.
Flame Tube Heating Two (2) sets DN200 Φ159x6.0mm, Φ219x6.0mm, Burner Connections, incl. 2x protection sleeves inside the main flame tube.
Insulation 50MM (2") inorganic Rockwool (CFC free); Thermal Conductivity: ≤ 0.044 w/(m2.k), Bottom Insulation 150MM (6")
 
Document Holder / Earth It is fitted rear end, suitable for shipping documents, MSDS, etc. Earth is located at the rear.
Data Plate / Markings Stainless steel data plate detailing specifications fitted rear end.
Frame The bitutainer container frame shall be mainly composed of an inner box type tank for bitumen, internal heating pipes, insulation, and nozzles, two (2) end frames, two (2) top side rails, two (2) bottom side rails, two (2) sidewalls and eight (8) corner fittings.
Ladder They have intergraded at the front end.
Temperature Gauge Analog gauge fitted rear end: -20°C to +300°C. / -4°F to +572°F.
Sensor Socket 1/2" BSP fitted rear end
Color RAL 9005 or custom

Actual measurements and specifications may vary and are subject to confirmation. 
Tank containers are supplied per the manufacturer's (Danteco Industries BV) general trading terms and conditions.

Related Products

Bitumen Tank Forklift HC Flame Tube

Bitumen Tank Forklift HC Flame Tube

Danteco supplies 25,000-liter 20FT HC (high-cube) with Reinforced Forklift Pockets equipped with bulk bitum...

Show More
Metal Hose for Bitumen or Aspalt

Metal Hose for Bitumen or Aspalt

Danteco has a long history of supplying flexible metal bitumen hose for its bitumen container and bitumen t...

Show More
Bitumen Tank HC Flame Tube

Bitumen Tank HC Flame Tube

Danteco supplies 25,000-liter 20FT HC (high-cube) ISO bulk bitumen tank containers with pair (two) flame tu...

Show More
20FT Bitumen Tank Flame Tube

20FT Bitumen Tank Flame Tube

Danteco supplies 25,000-litre ISO bulk bitumen tank containers. Our bitumen tank containers are separated for fo...

Show More