SPECIALISTS IN TANK CONTAINERS
Bitumen Bag Decanter Thermal-Oil Bitumen Bag Decanter Thermal-Oil
Stock Upon request
ISO Size 20FT ISO - 6058mm x 2438mm x 2591mm
Material Tank Body Mild / Carbon Steel

The Danteco Bitumen Bag Decanter Thermal-Oil Type is also known as a big-bag bitumen melting machine and a bitumen melter. It uses a thermal oil (hot oil) that circulates and transfers heat to the unique Bitumen Bag Decanter. It is a special-purpose iso bitucontainer mainly applied to melt the solid bitumen stored and shipped in 1MT bags (big bags). Liquid bitumen can be used in asphalt plants or asphalt terminals to supply hot bitumen to other clients, produce asphalt mixes, and serve other industrial purposes.

The Bitubag Decanter is based on a modular double-skin 20ft Bitumen container fitted with an internal heating pipe system for thermal oil (hot-oil heating. A 1.2 m x 1.2 m removable hatch is built into the tank's roof and can be removed using the provided lifting sling.

(1MT) One-ton bitumen bags are fed through a 1.2 x 1.2-meter removable top hatch. Cutting the bottom of the PP bag with the provided tool will allow the bitumen to slide gently into the tank. By the time the next bag is trimmed, the previous one has dispersed into the tank. A total of 20 one-ton bags can be loaded per charge, matching one shipping container full of bags. Upon completion of the charge, the top hatch is returned to the roof, the roof chimneys are opened, and the burners are started.

The heating system consists of a bed of 2" heating pipes permanently fitted on the bottom of the container. Heating can be monitored using a thermometer mounted near the discharge valve. 

Charging the DDecanter takes about 2 hours. The heating cycle will take 8-10 hours, depending on the final temperature and whether the DDecanter is kept permanently in operation.

Once the desired temperature has been reached, as evidenced by the thermometer next to the discharge valve, switch off the heating, connect the discharge hose and open the discharge valve. To assist the initial flow, it is recommended to heat the discharge valve with an LPG or diesel torch.

Operational Requirements

Thermal-Oil Installation to provide hot oil pumped via oil-in and oil-out DN200 connections on the decanter tank. Two workers are required to feed the bags in. Lifting the bags is usually done with a forklift with extended forks, a truck-crane arm, or a small mobile crane.

Tips for Safe Operation

1. The removable top hatch has water drainage ducts on both sides; however, during heavy rain, the ducts may be unable to cope with the flow. Cover the hatch with a tarp; always check for water before filling the tank.
2. To avoid corrosion, place the Decanteron on four concrete blocks, one on each corner,r of sufficient height to prevent flooding.
3. Always empty the bitumen hose after discharge to avoid blockage.

Key Features:

  • Capacity: 28500L / (7530 US Gallons) 6270 Gallons Imp. 
  • High Payload Capacity: 27.5 MT metric tonne loading capacity = optimal load per container
  • 20FT ISO Bitutainer Tank Design CSC Approved
  • Static Storage use or Intermodal
  • Bunded - Double Wall - Double Skin
  • Design temp. -40°C up-to +200°C / -40°F up-to +392°F
  • 2" Thermal-oil Heating Piping System, 12,5 m2 heating surface
  • 3" and 4" Outlet Bottom Discharge 100MM Ball valve includes 3" outlet with 3inch Cam-Lock coupling (male) & dust cap
  • Heavy Insulated 50mm~150mm where possible
  • Approvals by Lloyd's Register, the Netherlands

BITUMEN BAG DECANTER THERMAL-OIL - BITUMEN BOX CONTAINER - BITUTANK - BITUCONTAINER

CAPACITY 28500-Litre / 27,5MT LOAD CAPACITY - TYPE: 22H1

6058mm x 2438mm x 2591mm, 0.55 bar test pressure, double skin (bunded) and highly insulated, baffled, re-heating by thermal oil (hot oil).

NOMINAL 28.5 CBM VOLUME - LLOYD'S REGISTER APPROVAL - SEA - ROAD AND RAIL TRANSPORT

Dimensions:
  Metric Imperial
Nominal Capacity Tank 28500 LTR (7530 US GALLONS) 6270 GALLONS
Maximum Gross Weight 34000 KG 74960 LBS
Tare 6050 KG 13340 LBS
Construction:
Working Pressure 0.30 bar 4,35 psi
Test Pressure 0.55 bar 7,98 psi
Relief Valve Set Pressure 0.32 bar / -0.21 bar/vac 4,64 psi / -3 vac/psi
Bursting Disc Setting 0.35 bar 5,08 psi / -3 vac/psi
 
Ambient Temp. Range -20°C to +65°C -20°F up-to +149°F
Maximum Cargo Temp 200°C 392°F
Shell Material Anti-corrosive CORTEN-A Steel SPA-H, B480, 3,0mm Double Wall Outer Corrugated 1,6mm
Design Code / Approvals BS ISO668, ISO830, ISO1161, ISO1496-4(1991), CSC(2014), ISO6346, LRCCS(2014), TIR(1975), UIC(2010),
Standard Fittings:
Man lid/Hatch Cover Special hatch for big bags 1MT ~ 1,2MT and 500mm (20") diameter, 6-point fixing, 14mm x 12mm seal, located center.
Calibration Volumetric chart, nominal capacity 28,340 liters available.
Airline / Vapor 40MM (11⁄2") ball valve, outlet 11⁄2" BSP, s/s screw cap.
Relief Valve 65MM (21⁄2") high flow flanged, operating pressure 0,22 bar. Capacity: 8710m3/hr.
Bursting Disc DN80 (3") 0.35 bar (32 psi) setting.
Top Inlet Blanked weld-in flange drilled 6 M12 holes @ 168 pcd, provision for optional fitting of 80mm (3") stainless steel butterfly valve. DN80, ASA 150 bolted blank flange outlet, 80mm (3") removable full-length siphon tube.
Bottom Discharge Guard stainless steel 100MM 4" Ball valve - Outlet 3" BSP Flange with 3" Camlock Couplings and 3" Dust Cap.
Gaskets & Seals Parts in contact with cargo, PTFE/Teflon.
Thermal-Oil Heating 2" Thermal-Oil Heating Piping on the container floor, 12.5 squ.m heating surface.
Insulation 50MM (2") inorganic Rockwool (CFC free); Thermal Conductivity: ≤ 0.044 w/(m2.k), Bottom Insulation 150MM (6")
 
Document Holder / Earth It is fitted at the rear end and is suitable for shipping documents, MSDS, etc. Earth is located at the rear.
Data Plate / Markings Stainless steel data plate detailing specifications fitted rear end.
Frame The Bitumen Bag Decanter container frame shall be mainly composed of an inner box-type tank for bitumen, internal heating pipes, insulation, and nozzles, two (2) end frames, two (2) top side rails, two (2) bottom side rails, two (2) sidewalls and eight (8) corner fittings.
Ladder They are integrated at the front end.
Temperature Gauge Analog gauge fitted at the rear end: -20°C to +300°C. / -4°F to +572°F.
Sensor Socket 1/2" BSP fitted rear end
Color RAL 9005 or custom

Actual measurements and specifications may vary and are subject to confirmation. 
Tank containers are supplied in accordance with the manufacturer's (Danteco Industries BV) general trading terms and conditions.

Related Products

Bitumen Tank Thermal-Oil

Bitumen Tank Thermal-Oil

Danteco supplies a 25,000-liter bitumen tank, 20FT ISO bulk, with a thermal-oil heating system for PMB bitumen g...

Show More
Foodstuff Tanks

Foodstuff Tanks

Danteco offers a full range of 20FT T3-T11, 14m3, up to 26,000-liter ISO Food (Foodstuff) Tank Containers. All t...

Show More
20FT Double Wall Diesel Tank

20FT Double Wall Diesel Tank

International statutory authorities approve Danteco 20FT ISO T4 Double Wall Diesel Tank Containers for the safe ...

Show More
20FT Bitumen Tank Flame Tube

20FT Bitumen Tank Flame Tube

Danteco supplies 25,000-liter ISO bulk bitumen tank containers. Our bitumen tank container is used for four purp...

Show More