SPECIALISTS IN TANK CONTAINERS
20FT T50 LPG Gas Tank Container 20FT T50 LPG Gas Tank Container 20FT T50 LPG Gas Tank Container 20FT T50 LPG Gas Tank Container 20FT T50 LPG Gas Tank Container
Stock Upon request
ISO Size 20FT ISO - 6058mm x 2438mm x 2591mm
Material Tank Body Mild/ Carbon Steel

For Propane, LPG, and Anhydrous Ammonia, Danteco offers a full range with various pressure ratings of new and used ISO T50 Gas Tank Containers. All tanks have the highest quality design and construction and conform strictly to the latest international approvals. Our tank container fleet is separated for three transportation purposes: ISO Gas Tank for the liquefied gases Propane, LPG, and Anhydrous Ammonia. All tanks have the highest quality design and construction and conform strictly to the latest international approvals.
ISO Gas tank containers are designed to safely transport liquefied Propane, LPG, and Anhydrous Ammonia by road, rail, deep sea, and short sea. Suitable for domestic and international transport, filling, draining, and temporary storage or backup storage of propane, LPG, and anhydrous ammonia gases.

20FT ISO FULL FRAME UN PORTABLE T50 TANK CONTAINER - LPG GAS TANK CONTAINER

  • Design Code ASME VIII Division 2 (ASME U2 Stamp)
  • Guard Brand standard valves and couplings (PV Valve, Liquid Line valve, and Gas Line valve)
  • Aluminum Sunshield
  • Locking Valve Protection Cabinet
  • Baffle Plates inside (with or without)

Option:

  • Level Gauge
  • Internal Zinc Coating

Year manufactured: "new build."

Dimensions:
  Metric Imperial
Capacity 24600 LTR 5411 GALLONS (6498 US Gallons)
Maximum Gross Weight 36000 KG 79365 LBS
Maximum Payload 29500 KG 65035 LBS
Tare 6500 KG 14330 LBS
Stacking 213360 KG 470378 LBS
Construction:   
MAWP. Acc. IMDG/ADR/RID 18 bar 261 psi
MAWP. Acc. US-DOT 16.4 bar 237.9 psi
MITI Test Pressure 30 bar 435 psi
Tank Test Pressure 25.1 bar 364 psi
 
Ambient Temp. Range -40°C up-to +55°C -40°F up-to +266°F
MDMT -40°C 266°F
Frame Design Temperature -20°C up-to +65°C  
Vessel Shell Material ASME SA612M, Normalized
Dished ends ASME SA612M, Normalized
Flanges SA 350 LF2 CL.1
Frame to Shell Material ASME SA 516 or Equivalent
Baffle Three pc. SA-240 304 Horizontal removable 
Design Code / Approvals US DoT approval: ASME VIII Div-2:2021 class 2 with U2 Designator & code case 2624-1 & SP20932; IMDG/ADR/RID approvals: ASME VIII Div-2:2021 class 2
Frame CSC, ISO 1496/3(1CC)
General MDG/ADR/RID/US DOT(CFR49)-UN Portable Tank T50, UIC, TIR, TC
Standard Fittings:
Man-lid 500mm (20") diameter, Carbon steel, 20 bolts manlid fitted at the vessel's rear and bolted cover fitted, with TIR. Metal spiral-wound stainless/PTEF gasket.
Safety Relief Valve Guard brand, one 3” Flange (DN80) 3”,  Stainless steel, 18 bar pressure safety relief valve, without flameproof gauze. Fitted tangentially off the top center line, drilled/tapped – 8 x M24 on 220mm PCD. Metal spiral-wound stainless/PTEF gasket.
Gas Line Guard Brand 2” Flange (DN50) 2”, One Stainless steel, 2” excess flow gas foot valve and DN50 ball valve flanged with 1.75” ACME outlet and 1.75” ACME cap and plug, 1/4” Purge valve fitted. 1.25” pipe internally to the gas phase.
Liquid Line 2” Flange (DN50) 2”, One Stainless steel, 2” excess flow gas foot valve and DN50 ball valve flanged with 3.25” ACME outlet and 3.25” ACME cap and plug, 1/4” Purge valve fitted. 2” pipe internally to the bottom of the tank, with sump.
Pressure Gauge One, weld-in flange one end connected to the gas phase of the vessel, and the other end screw with a ball valve (or needle valve) and a manometer. Fitted on the Rear end right-hand side.
Thermometer One, weld-in flange screw with dual scales probe type analogue thermometer, ranging from -60°C to +100°C and -75°F to +210°F. Located rear end left-hand side.
Sun Shield The top of the tank is fitted with a sun shield, cover angle of approx.120°. Material: Aluminium alloy 2mm.
Document Holder / Earth Ø75mm x 325mm Fitted to the inside of the right-hand side, adjacent to the rear corner post. Suitable for shipping documents, MSDS, etc. The earth connection is located at the rear, 40x30x3mm, with a φ9mm hole.
Data Plate / Markings Stainless steel data plate detailing specifications fitted rear end.
RAL Color / Paint Exterior 9010 - White, Custom Color, or Two Tone

Actual measurements and specifications may vary and are subject to confirmation. 
Tank containers are supplied per the manufacturer's (Danteco Industries BV) general trading terms and conditions.

Related Products

Cement Tank Container

Cement Tank Container

Pneumatic operated Cement Tank for bulk powder cement is approved by international statutory authorities to...

Show More
T11 ISO Tank Container

T11 ISO Tank Container

Danteco offers a full range of 20FT T11, 14 to 26,000-litre ISO Tank Containers. All tanks have the highest qual...

Show More
20FT Diesel Tank Container

20FT Diesel Tank Container

International statutory authorities approve Danteco's Diesel Tank Container 20FT ISO T11 for the s...

Show More
Bitucontainer - Bitumen Box Container

Bitucontainer - Bitumen Box Container

Our bitucontainers (bitumen box containers) can be divided into five purposes: bitumen containers for bitumen st...

Show More