SPECIALISTS IN TANK CONTAINERS
20FT Bitumen Tank Stationary 20FT Bitumen Tank Stationary 20FT Bitumen Tank Stationary 20FT Bitumen Tank Stationary 20FT Bitumen Tank Stationary 20FT Bitumen Tank Stationary 20FT Bitumen Tank Stationary 20FT Bitumen Tank Stationary 20FT Bitumen Tank Stationary
Stock Upon request
ISO Size 20FT ISO - 6058mm x 2438mm x 2591mm
Material Tank Body Mild / Carbon Steel

Danteco Industries BV offers a new-build stationary bitumen tank with a capacity of 27,200 liters for sale and rental. Our stationary bitumen tank and bitutainer are high-performance storage tanks suitable for bitumen storage and intermodal transport, including short-sea and deep-sea shipping, inland waterways, rail transport, and road transport. Suitable storage and transportation include bitumen logistics, asphalt bitumen emulsion, heavy fuel oil (HFO), crude oil, and polymer-modified bitumen (PMB / PMBs). All Danteco bitutainers are of the highest quality in design and construction and meet the latest international approvals.

Please note that in certain exceptional cases, tank containers operated by Danteco Industries BV may have specifications that differ from the above descriptions.

Also, the cargo in the container must comply with the host country's dimensional regulations and laws, which may affect the payload. For more information or assistance, please get in touch with our office.

TYPE: 22H1/ 6058mm x 2438mm x 2591mm, 0.55 bar test pressure, double-walled (bundled) and SUPER insulated, baffle plates, flame pipe type (direct flame). The design allows for partial loads to be carried with baffle plates. **Also available with thermal oil and electric heating system**

  • Capacity: 27200L / (7185 US Gallons) 5983 Gallons Imp. 
  • Bitumen Tank Stationary Design CSC Approved
  • Design temp. -40°C up-to +200°C / -40°F up-to +392°F
  • Flame Tube Design (direct fire)
  • 3" and 4" outlet Guard Brand Bottom Discharge 100MM 9DN100) Ball valve includes 3" outlet with 3-inch Cam-Lock coupling (male) & dust cap
  • "SUPER" Insulated 150mm
  • Approvals by Lloyd's Register, the Netherlands

BITUTAINER - BITUMEN BOX CONTAINER - BITUTANK - 20FT ISO

CAPACITY 28500-Litre / 27,5MT LOAD CAPACITY - TYPE: 22H1

6058mm x 2438mm x 2591mm, 0.55 bar test pressure, double-skin (bunded) and highly insulated, baffled, flame-tube type (direct fire), re-heating by LPG gas burner or diesel burner.

NOMINAL 28.5 CBM VOLUME - LLOYD'S REGISTER APPROVAL - SEA - ROAD AND RAIL TRANSPORT

Dimensions:
  Metric Imperial
Nominal Capacity Tank 27200 LTR (7185 US GALLONS) 5983 GALLONS
Maximum Gross Weight 34000 KG 74960 LBS
Tare 5800 KG 12786 LBS
Construction:
Working Pressure 0.30 bar 4,35 psi
Test Pressure 0.55 bar 7,98 psi
Relief Valve Set Pressure 0.32 bar / -0.21 bar/vac 4,64 psi / -3 vac/psi
Bursting Disc Setting 0.35 bar 5,08 psi / -3 vac/psi
 
Ambient Temp. Range -20 °C to +65 °C -20 °F up-to +149 °F
Maximum Cargo Temp 200 °C 392 °F
Shell Material Anti-corrosive CORTEN-A Steel SPA-H, B480, 3,0mm Double Wall Outer Corrugated 1,6mm
Design Code / Approvals BS ISO668, ISO830, ISO1161, ISO1496-4(1991), CSC(2014), ISO6346, LRCCS(2014), TIR(1975), UIC(2010),
Standard Fittings:
Man lid/Hatch Cover 500mm (20") diameter, 6-point fixing, 14mm x 12mm seal, located center.
Calibration Volumetric chart, nominal capacity 28,340 liters available.
Airline / Vapor 40MM (11⁄2") ball valve, outlet 11⁄2" BSP, s/s screw cap.
Relief Valve 65MM (21⁄2") high flow flanged, operating pressure 0,22 bar. Capacity: 8710m3/hr.
Bursting Disc DN80 (3") 0.35 bar (32 psi) setting.
Top Inlet Blanked weld-in flange drilled 6 M12 holes @ 168 pcd, provision for optional fitting of 80mm (3") stainless steel butterfly valve. DN80, ASA 150 bolted blank flange outlet, 80mm (3") removable full-length siphon tube.
Bottom Discharge Guard stainless steel 100MM 4" Ball valve - Outlet 3" BSP Flange with 3" Camlock Couplings and 3" Dust Cap.
Gaskets & Seals Parts in contact with cargo, PTFE/Teflon.
Flame Tube Heating Two (2) sets DN200 Φ159x6.0mm, Φ219x6.0mm, Burner Connections, incl. 2x protection sleeves inside the main flame tube.
Insulation 50MM (2") inorganic Rockwool (CFC free); Thermal Conductivity: ≤ 0.044 w/(m2.k), Bottom Insulation 150MM (6")
 
Document Holder / Earth It is fitted at the rear end and is suitable for shipping documents, MSDS, etc. Earth is located at the rear.
Data Plate / Markings Stainless steel data plate detailing specifications fitted rear end.
Frame The bitutainer container frame shall be mainly composed of an inner box type tank for bitumen, internal heating pipes, insulation, and nozzles, two (2) end frames, two (2) top side rails, two (2) bottom side rails, two (2) sidewalls and eight (8) corner fittings.
Ladder They are integrated at the front end.
Temperature Gauge Analog gauge fitted at the rear end: -20°C to +300°C. / -4°F to +572°F.
Sensor Socket 1/2" BSP fitted rear end
Color RAL 9005 or custom

Actual measurements and specifications may vary and are subject to confirmation. 
Tank containers are supplied in accordance with the manufacturer's (Danteco Industries BV) general trading terms and conditions.

Related Products

Container Lashing Equipment & Cargo Securing Devices

Container Lashing Equipment & Cargo Securing Devices

Longkou Xinlong Machinery Equipment Co., Ltd. is a manufacturer of container lashing equipment ...

Show More
20FT Bitumen Tank Flame Tube

20FT Bitumen Tank Flame Tube

Danteco supplies 25,000-liter ISO bulk bitumen tank containers. Our bitumen tank container is used for four purp...

Show More
Stationary Diesel Tank ISO Swap

Stationary Diesel Tank ISO Swap

Danteco develops and supplies stationary swap body diesel tank containers approved by international regulatory b...

Show More
Bitumen Tank Forklift HC Flame Tube

Bitumen Tank Forklift HC Flame Tube

Danteco supplies 25,000-liter 20FT HC (high-cube) bulk bitumen tank containers with Reinforced Forklift Poc...

Show More