Do you need a quick, significant volume of hot, boiling water at your frac site, well site, or oilfield?
Our 20FT Double-Wall Hot Water Storage Tank, temperature-controlled, is designed to deliver that on-site!
The Hot Water Storage Tank is heated by two large diesel burners (190 kW each), and you can produce boiling water at any remote location.
The 20ft hot water storage tank can be used for five purposes: storage, short-sea shipping, deep-sea shipping, rail transport, and road transport. Danteco Industries BV offers a hot-water storage tank for direct sale.
The units are also suitable for storage, transportation, and logistics of bitumen, asphalt bitumen emulsion, heavy fuel oil (HFO), and heavy crude oil.
All Danteco bitutainer-like/bitumen box containers are of the highest quality in design and construction and strictly conform to the latest international approvals.
Please note that in certain exceptional cases, the containers operated by Danteco Industries BV may have specifications that differ from the descriptions above. Also, cargo in a container must comply with the host country's dimensional regulations and laws; thus, payload capacity may be affected. For more information or assistance, please contact our customer service.
TYPE: 22H1 / 6058mm x 2438mm x 2591mm, 0.55 bar test pressure, double-skin (bunded) and super-insulated, flame-tube type (direct fire). The design allows partial payloads to be carried, fitted with baffle plates. **Also available with thermal-oil and electrical heating system**
- Capacity: 28500L / (7530 US Gallons) 6270 Gallons Imp.
- 20FT ISO Bitutainer Tank Design CSC Approved
- Design temp. -40°C up-to +200°C / -40°F up-to +392°F
- Internal tank for hot water and internal heating pipes are made of stainless steel (S.S. 430 or equivalent).
- Custom modifications to the original design are possible. (including various nozzle connections front & rear)
- Unique high surface flame tube design (direct fire)
- 3" and 4" outlet Bottom Discharge 100MM Ball valve includes 3" outlet with 3-inch Cam-Lock coupling (male) & dust cap
- Heavy insulated 100 mm~150 mm where possible
SPECIFICATION: HOT WATER STORAGE ISO TANK - 20FT ISO
CAPACITY 28500-Litre - TYPE: 22H1
6058mm x 2438mm x 2591mm, 0.55 bar test pressure, double-skin (bunded) and super-insulated, baffled, flame-tube type (direct fire), re-heating by LPG gas burner or diesel burner.
NOMINAL 28,5 CBM VOLUME - LLOYD'S REGISTER APPROVAL - SEA - ROAD AND RAIL TRANSPORT
| Dimensions: |
| |
Metric |
Imperial |
| Nominal Capacity Tank |
28500 LTR |
(7530 US GALLONS) 6270 GALLONS |
| Maximum Gross Weight |
34000 KG |
74960 LBS |
| Tare |
6050 KG |
13340 LBS |
| Construction: |
| Working Pressure |
0.30 bar |
4,35 psi |
| Test Pressure |
0.55 bar |
7,98 psi |
| Relief Valve Set Pressure |
0.32 bar / -0.21 bar/vac |
4,64 psi / -3 vac/psi |
| Bursting Disc Setting |
0.35 bar |
5,08 psi / -3 vac/psi |
| |
| Ambient Temp. Range |
-20 °C to +65 °C |
-20 °F up-to +149 °F |
| Maximum Cargo Temp |
200 °C |
392 °F |
| Shell Material |
Anti-corrosive CORTEN-A Steel SPA-H, B480, 3,0mm Double Wall Outer Corrugated 1,6mm / Inner Tank Stainless steel 430 |
| Design Code / Approvals |
BS ISO668, ISO830, ISO1161, ISO1496-4(1991), CSC(2014), ISO6346, LRCCS(2014), TIR(1975), UIC(2010), |
| Standard Fittings: |
| Man lid/Hatch Cover |
500mm (20") diameter6-pointnt fixing, 14mm x 12mm seal, located center. |
| Calibration |
Volumetric chart, nominal capacity 28,340 liters available. |
| Airline / Vapor |
40MM (11⁄2") ball valve, outlet 11⁄2" BSP, s/s screw cap. |
| Relief Valve |
65MM (21⁄2") high flow flanged, operating pressure 0,22 bar. Capacity: 8710m3/hr. |
| Bursting Disc |
DN80 (3") 0.35 bar (32 psi) setting. |
| Top Inlet |
Blanked weld-in flange drilled 6 M12 holes @ 168 pcd, provision for optional fitting of 80mm (3") stainless steel butterfly valve. DN80, ASA 150 bolted blank flange outlet, 80mm (3") removable full-length siphon tube. |
| Bottom Discharge |
Guard stainless steel 100MM 4" Ball valve - Outlet 3" BSP Flange with 3" Camlock Couplings and 3" Dust Cap. |
| Gaskets & Seals |
Parts in contact with cargo, PTFE/Teflon. |
| Flame Tube Heating |
Two (2) sets DN200 Φ159x6.0mm, Φ219x6.0mm, Burner Connections, incl. 2x protection sleeves inside the main flame tube. |
| Insulation |
50MM (2") inorganic Rockwool (CFC free); Thermal Conductivity: ≤ 0.044 w/(m2.k), Bottom Insulation 150MM (6") |
| |
| Document Holder / Earth |
It is fitted at the rear end and is suitable for shipping documents, MSDS, and similar materials. Earth is located at the rear. |
| Data Plate / Markings |
Stainless steel data plate detailing specifications fitted to the rear end. |
| Frame |
The hot water tank container frame shall be mainly composed of an inner box type tank for bitumen, internal heating pipes, insulation, and nozzles, two (2) end frames, two (2) top side rails, two (2) bottom side rails, two (2) sidewalls, and eight (8) corner fittings. |
| Ladder |
They are integrated at the front end. |
| Temperature Gauge |
Analog gauge fitted at the rear end: -20 °C to +300 °C. / -4 °F to +572 °F. |
| Sensor Socket |
1/2" BSP fitted rear end |
| Color RAL |
9005 or custom |
Actual measurements and specifications may vary and are subject to confirmation.
Tank containers are supplied in accordance with the manufacturer's (Danteco Industries BV) general trading terms and conditions.