SPECIALISTS IN TANK CONTAINERS
20FT Reefer Tank 20FT Reefer Tank 20FT Reefer Tank 20FT Reefer Tank
Stock Upon request
ISO Size 20FT ISO - 6058mm x 2438mm x 2591mm
Material Tank Body Stainless Steel 316L

Reefer (Cool) Tank Container (s) are approved by international statutory authorities to safely transport various food products. Fruit Juices, Milk, Beverages, and General Purpose Liquids

Refrigeration

Klinge Corporation End or Side Mounted Model

Model TCR-109 - Klinge Corporation End or Side Mounted Model

Refrigeration Unit, Model TCR-109, heats and cools the tank’s cargo by circulating brine (glycol) or synthetic oil around external cooling coils around the tank. The unit is designed, so the mechanical section fits on the side of the container, and the electrical control box is at the end, easily accessible when stacked at a terminal or onboard vessels.

This system transports hazardous and non-hazardous chemicals, pharmaceuticals, food (foodstuff) products, and beverages.  

Cooling System

14 run system comprising eight (8) runs straddling the spillage trays on the top half of the tank, and six (6) runs on the bottom half of the tank. Runs manufactured from 304L /316L stainless steel.

SPECIFICATION REFRIGERATED (REEFER) COOL TANK CONTAINER 20FT ISO

REEFER (COOL) TANK CONTAINER: up to 24000-Litre UN Portable Tank T7/ T11 6058mm x 2438mm x 2591mm, Full-frame Collar Type
6.0 bar test pressure, insulated, with Reefer Cooling System

Year manufactured: New Build and Refurbished Used

Dimensions:
  Metric Imperial
Capacity up to 24000 LTR (6340 US GALLONS) 5280 GALLONS
Maximum Gross Weight 3600 KG 74956 LBS
Tare 4700 KG 8113 LBS
Construction:
Working Pressure 4.0 bar 58 psi
Test Pressure 6.0 bar 87 psi
Steam Working Pressure 4.0 bar 58 psi
Steam Test Pressure 6.0 bar 87 psi
Relief Valve Set Pressure 4.4 bar 63 psi
Ambient Temp. Range -40°C to +65°C -40°F to +149°F
Maximum Cargo Temp 130°C 248°F
Shell Material Stainless steel, ASTM A240 304 low carbon <0.03% DIN 17441 w1.4401. Cold rolled shell 2B finish. Thickness nominal 4.2mm shell +0.1 corrosion allowance, 4.65 ends, and equivalent 6mm mild steel per regulations.
Design Code / Approvals ASME, Section VIII, Division 1 where applicable and IMDG T11, US Dot CFR 49 T11, ADR, RID, UIC, CTC, AAR, CSC, TIR. ISO.
Standard Fittings:
Manlid Guard 500mm (20") diameter, 8 point fixing, 14mm x 12mm seal.
Calibration Volumetric stainless steel chart.
Airline / Vapour Guard 40mm (1½") ball valve, outlet 1½ " BSP, stainless steel screw cap.
Relief Valve 80mm (3") DN65 flanged Guard high flow valve, operating pressure 4.4 bar, weld-in flange plugged provision for a second flanged valve.
Top Outlet Blanked weld-in flange drilled 6 M12 holes @ 168 pcd, provision for optional fitting of 80mm (3") stainless steel butterfly valve. DN80, ASA 150 bolted blank flange outlet, 80mm (3") removable full-length syphon tube.
Bottom Discharge 1x 3" 45 deg. Swing Footvalve from Guard (clean-flow style) bottom discharge valve assembly (foot-valve, butterfly, and cap) with 3" Cam-lock Provision or 3" BSP flanged outlet with 3" BSP dust cap all in stainless steel 316
Remote Closure The bottom valve closure device is fitted together with the provision of a fusible link.
Gaskets & Seals Parts in contact with cargo, PTFE/Teflon
Steam Heating Six (6) runs giving 8.5m2 effective surface area, with 0.75" BSP inlet/outlet cap, Working Pressure at 4 Bar Temperature 130°C.
Insulation 50 mm thick Polyurethane covered 1.8mm white GRP cladding.
Compartment Open stainless steel spill compartments with provision for optional lids.
Document Holder / Earth Fitted at the rear end, suitable for shipping papers, MSDS, etc. The Earth is located at the rear.
Data Plate / Markings Data Plate / Markings.
Walkway Aluminium Q grating with access to top fittings, extending to the front end. Provision for an optional handrail. A ladder at rear RHS (rear hand side)
Temperature Gauge

80mm dia dual scale -20°C to 200°C / 0 to 400°F.

Cooling System Klinge side-mounted TCR-109 refrigeration system complete with glycol expansion tank and rear-mounted control box.
Options:
Genset Use Klinge front-mounted TCR-104 refrigeration system and add NMG-112 Genset (generator)(suitable for < 23 CBM capacity).
Accessories Data-logger - Heater unit
T-Code It can be upgraded to make it suitable to carry dangerous goods under T-code.

Actual measurements and specifications may vary and are subject to confirmation. 
Tank containers are supplied per the manufacturer's (Danteco Industries BV) general trading terms and conditions.

Related Products

Foodstuff Tanks

Foodstuff Tanks

Danteco offers a full range of 20FT T3 - T11, 14m3, till 26,000 liter ISO Food (Foodstuff) Tank Containers. All ...

Show More
20FT Nitric Acid Tank Container

20FT Nitric Acid Tank Container

Nitric Acid UN 2031 is a component to produce ammonium nitrate, a major component of fertilizers. It is als...

Show More
ISO Powder Tank Container

ISO Powder Tank Container

International statutory authorities approve the pneumatic-operated cement tank with the danteco aeration system ...

Show More
20FT Bitumen Tank Flame Tube

20FT Bitumen Tank Flame Tube

Danteco supplies 25,000-litre ISO bulk bitumen tank containers. Our bitumen tank container is separated for four...

Show More