|ISO Size||20FT ISO - 6058mm x 2438mm x 2591mm|
|Material Tank Body||Stainless Steel 316L|
Approvals by Lloyd's Register, the Netherlands
Danteco offers a full range of 20FT T3 - T11, 14m3, till 26,000 liter ISO Food (Foodstuff) Tank Containers. All tanks have the highest quality design and construction and conform strictly to the latest international approvals.
All tanks have the highest quality design and construction and conform strictly to the latest international approvals.
Tanks deliver real-time and labor savings while making door-to-door transport a smooth operation. Loaded and discharged using normal in-plant liquid transfer systems, tank containers are lifted using standard ISO lifting equipment. The switch between road, rail, and sea or storage at a destination is safe, straightforward, and economical. Food tank containers are approved to the highest standards by international statutory authorities for the safe transportation of a wide range of liquid products and, in particular, the following:
Please note that in certain exceptional cases, the containers operated by Danteco may have specifications that differ from the descriptions above.
Also, cargo in a container must conform to the dimensional regulations and laws stipulated by the host country; thus, payload capacity may be affected.
For more information or assistance, please contact our corporate office.
6058mm x 2438mm x 2591mm, General Purpose Tank Container for Foodstuff
6.0 bar test pressure, 4 bar working pressure, insulated, steam heated.
Year manufactured: New Build and Refurbished Used
|Capacity||25000 LTR||5500 US GALLONS|
|Maximum Gross Weight||34000 KG||74957LBS|
|Working Pressure||4.0 bar||58 psi|
|Test Pressure||6.0 bar||87 psi|
|Steam Working Pressure||4.0 bar||58 psi|
|Steam Test Pressure||6.0 bar||87 psi|
|Relief Valve Set Pressure||4.4 bar||63 psi|
|Ambient Temp. Range||-40°C to +65°C||-40°F to +149°F|
|Maximum Cargo Temp||130°C||248°F|
|Shell Material||Stainless steel, ASTM A240 316 / 316L low carbon <0.03% DIN 17441 w1.4401. Cold rolled shell 2B finish. Thickness nominal 4.2mm shell +0.1 corrosion allowance, 4.65 ends, and equivalent 6mm mild steel per regulations.|
|Design Code / Approvals||ASME, Section VIII, Division 1 where applicable and IMDG T11, US Dot CFR 49 T11, ADR, RID, UIC, CTC, AAR, CSC, TIR. ISO.|
|Manlid||500mm (20") diameter, 8 point fixing, 14mm x 12mm seal.|
|Calibration||Volumetric stainless steel chart.|
|Airline / Vapour||40mm (1½") Ball valve Guard, outlet 1½ " BSP, stainless steel screw cap.|
|Relief Valve||80mm (3") DN65 flanged Guard high flow, operating pressure 4.4 bar, weld-in flange plugged provision for a second flanged valve.|
|Top Outlet||Blanked weld-in flange drilled 6 M12 holes @ 168 pcd, provision for optional fitting of 80mm (3") stainless steel butterfly valve. DN80, ASA 150 bolted blank flange outlet, 80mm (3") removable full-length syphon tube.|
|Bottom Discharge||80mm(3") Guard high lift foot valve and Guard clamped 80mm (3") Butterfly valve. Outlet 3" BSP screw thread and cap.|
|Remote Closure||The bottom valve closure device is fitted together with the provision of a fusible link.|
|Gaskets & Seals||Parts in contact with cargo, PTFE/Teflon, and rubber|
|Steam Heating||7.5m² (80'²) effective surface area, eight external steam ducts, ¾" BSP screw inlet/outlet, and cap. Maximum pressure 4 bars. Tank max temperature 130°C.|
|Insulation||50mm (2") total comprising 50mm mineral wool 55 kg/m3 (CFC free) semi-rigid stiffened at top and covered by 0.8mm grade 5251 H44 aluminum pre-painted cladding, estimated thermal value 37 Kcal/hr at 30°C.|
|Compartment||Open stainless steel spill compartments with provision for optional lids.|
|Document Holder / Earth||Fitted at the rear end, suitable for shipping papers, MSDS, etc. The Earth is located at the rear.|
|Data Plate / Markings||Data Plate / Markings.|
|Walkway||Aluminium Q grating with access to top fittings, extending to the front end. Provision for an optional handrail. A ladder at rear RHS (rear hand side)|
80mm dia dual scale -20°C to 200°C / 0 to 400°F.
Actual measurements and specifications may vary and are subject to confirmation.
Tank containers are supplied per the manufacturer's (Danteco Industries BV) general trading terms and conditions.
Danteco offers a full range of 20FT T3 - T11, 14m3, till 26,000 liter ISO Food (Foodstuff) Tank Containers. All ...Show More
Pneumatic operated Cement Tank for bulk powder cement is approved by international statutory authorities to...Show More
Danteco supplies 25,000-liter 20FT HC (high-cube) ISO bulk bitumen tank containers with pair (two) flame tu...Show More
© COPYRIGHT 2022 - DANTECO INDUSTRIES BV