SPECIALISTS IN TANK CONTAINERS
Bitutainer Electrical Heated Bitutainer Electrical Heated Bitutainer Electrical Heated Bitutainer Electrical Heated Bitutainer Electrical Heated Bitutainer Electrical Heated Bitutainer Electrical Heated Bitutainer Electrical Heated Bitutainer Electrical Heated
Stock Upon request
ISO Size 20FT ISO - 6058mm x 2438mm x 2591mm
Material Tank Body Mild / Carbon Steel

Danteco Industries BV offers newly built and electrical heated 28,500 liters/volume bitumen box containers (bitutainer) for direct sale and long en short leasing. Our electrical heated bitutainer (s) / bitumen box containers can be divided into five purposes: bitumen containers for bitumen storage, short-sea, deep-sea shipping, rail transport, and road transport. Suitable for storage, transport, and logistics of bitumen, asphalt bitumen emulsion, heavy fuel oil (HFO), heavy crude oil, and polymer-modified bitumen (PMB / PMBs). All Danteco tank containers are of the highest quality design and construction and conform strictly to the latest international approvals.

Please note that in certain exceptional cases, the containers operated by Danteco Industries BV may have specifications that differ from the descriptions above.

Also, cargo in a container must conform to the dimensional regulations and laws stipulated by the host country; thus, payload capacity may be affected. For more information or assistance, please contact our customer service.

TYPE: 22H1/ 6058mm x 2438mm x 2591mm, 0.55 bar test pressure, double skin (bunded) and highly insulated, electrical. The design allows partial payloads to be carried, fitted with baffle plates. **Also available with flame tube heating system (direct fire) or thermal-oil heating system**

  • Capacity: 28500L / (7530 US Gallons) 6270 Gallons Imp. 
  • High Payload Capacity 27,5MT Metric tonne loading capacity = optimal load per container
  • 20FT ISO Bitutainer Tank Design CSC Approved
  • Design temp. -40°C up-to +200°C / -40°F up-to +392°F
  • Electrical Heating (4x Heating Element 15KW, L= 5,4mtr)
  • 3" and 4" outlet Bottom Discharge 100MM Ball valve includes 3" outlet with 3inch Cam-Lock coupling (male) & dust cap
  • Heavy Insulated 50mm~150mm where possible
  • Approvals by Lloyd's Register, the Netherlands

SPECIFICATION: BITUMEN BOX CONTAINER - BITUTAINER  - ELECTRICAL HEATED - BITUTANK - BITUBOX - 20FT ISO

CAPACITY 28500-Litre / 27,5MT LOAD CAPACITY - TYPE: 22H1/ 6058mm x 2438mm x 2591mm, 0.55 bar test pressure, double skin (bunded) and highly insulated, baffled, electrical type.

NOMINAL 28,5CBM VOLUME - LLOYD'S REGISTER APPROVAL - SEA - ROAD AND RAIL TRANSPORT

Dimensions:
  Metric Imperial
Nominal Capacity Tank 28500 LTR (7530 US GALLONS) 6270 GALLONS
Maximum Gross Weight 34000 KG 74960 LBS
Tare 6050 KG 13340 LBS
Construction:
Working Pressure 0.30 bar 4,35 psi
Test Pressure 0.55 bar 7,98 psi
Relief Valve Set Pressure 0.32 bar / -0.21 bar/vac 4,64 psi / -3 vac/psi
Bursting Disc Setting 0.35 bar 5,08 psi / -3 vac/psi
 
Ambient Temp. Range -20°C to +65°C -20°F up-to +149°F
Maximum Cargo Temp 200°C 392°F
Shell Material Anti Corrosive CORTEN-A Steel SPA-H, B480, 3,0mm Double Wall Outer Corrugated 1,6mm
Design Code / Approvals BS ISO668, ISO830, ISO1161, ISO1496-4(1991), CSC(2014), ISO6346, LRCCS(2014), TIR(1975), UIC(2010),
Standard Fittings:
Man lid/Hatch Cover 500mm (20") diameter, 6 point fixing, 14mm x 12mm seal, located center.
Calibration Volumetric chart, nominal capacity 28,340 liters available.
Airline / Vapor 40MM (11⁄2") ball valve, outlet 11⁄2" BSP, s/s screw cap.
Relief Valve 65MM (21⁄2") high flow flanged, operating pressure 0,22 bar. Capacity: 8710m3/hr.
Bursting Disc DN80 (3") 0.35 bar (32 psi) setting.
Top Inlet Blanked weld-in flange drilled 6 M12 holes @ 168 pcd, provision for optional fitting of 80mm (3") stainless steel butterfly valve. DN80, ASA 150 bolted blank flange outlet, 80mm (3") removable full-length syphon tube.
Bottom Discharge Guard stainless steel 100MM 4" Ball valve - Outlet 3" BSP Flange with 3" Camlock Couplings and 3" Dust Cap.
Gaskets & Seals Parts in contact with cargo, PTFE/Teflon.
Electrical Heating By 4x Electrical-heater (4x15KW) 60KW, 460 Volts @ 50/60 Hertz, to be placed into the 4X 6" pipe, the heater's length is 5400mm.
Insulation 50MM (2") inorganic Rockwool (CFC free); Thermal Conductivity: ≤ 0.044 w/(m2.k), Bottom Insulation 150MM (6")
 
Document Holder / Earth It is fitted rear end, suitable for shipping documents, MSDS, etc. Earth is located at the rear.
Data Plate / Markings Stainless steel data plate detailing specifications fitted rear end.
Frame The bitutainer container frame shall be mainly composed of an inner box type tank for bitumen, internal heating pipes, insulation, and nozzles, two (2) end frames, two (2) top side rails, two (2) bottom side rails, two (2) sidewalls and eight (8) corner fittings.
Ladder Intergraded at the front end.
Temperature Gauge Analog gauge fitted rear end: -20°C to +300°C. / -4°F to +572°F.
Sensor Socket 1/2" BSP fitted rear end
Color RAL 9005 or custom

Actual measurements and specifications may vary and are subject to confirmation. 
Tank containers are supplied per the manufacturer's (Danteco Industries BV) general trading terms and conditions.

Related Products

Bitutainer Electrical Heated

Bitutainer Electrical Heated

Danteco Industries BV offers newly built and electrical heated 28,500 liters/volume bitumen box containers&...

Show More
Bitutainer

Bitutainer

Our bitutainers (bitumen box containers) can be divided into five purposes: bitumen containers for bitumen stora...

Show More
T50 Gas Tank Container

T50 Gas Tank Container

For Propane, LPG, and Anhydrous Ammonia, Danteco offers a full range with various pressure ratings of new and us...

Show More
ISO Cement Tank Container

ISO Cement Tank Container

Pneumatic operated Cement Tank for bulk powder cement is approved by international statutory authorities to...

Show More