SPECIALISTS IN TANK CONTAINERS
40FT Bitumen Bag Decanter 40FT Bitumen Bag Decanter
Stock Upon request
ISO Size 40FT ISO - 12192mm x 2438mm x 2591mm
Material Tank Body Mild / Carbon Steel

The Danteco 40FT Bitumen Bag Decanter is also known as a big-bag bitumen melting machine, bitumen collecting container, and bitumen melter. It uses direct-fired flame-tube heating or hot-oil (thermal oil) circulation to transfer heat to the unique Bitumen Bag Decanter. It is a special-purpose iso bitucontainer mainly applied to melt the solid bitumen stored and shipped in 1MT bags (big bags). Asphalt plants or asphalt terminals can use liquid bitumen to supply hot bitumen to other clients, produce asphalt mixes, and serve other industrial purposes.

The Bitubag Decanter is based on a modular double-skin 40FTBitumen Container fitted with heating pipes and diesel burners. A 1.2 m x 1.2 m removable hatch is built into the tank's roof and can be removed using the provided lifting sling.

(1MT) One-ton bitumen bags are fed through a 1.2 x 1.2-meter removable top hatch. Cutting the bottom of the PP bag with the provided tool will allow the bitumen to slide gently into the tank. By the time the next bag is trimmed, the previous one has dispersed into the tank. A total of 60 one-ton bags can be loaded per charge, matching one shipping container full of bags. Upon completion of the charge, the top hatch is returned to the roof, the roof chimneys are opened, and the burners are started.

The heating system consists of two (2) Max 8TL diesel burners permanently fitted to the heating pipes at one end of the container. Heating can be monitored using a thermometer mounted near the discharge valve. During initial heating, this thermometer can be unscrewed and inserted into a sensor pocket halfway up the tank to guard against overheating of the bitumen, in which case the burners can be temporarily switched off or alternated between left and right. Instead of moving the thermometer, it is recommended to insert a second thermometer into the pocket halfway up and set the burners to a timer to regulate the heat.

Charging the Decanter: about 2 hours. The heating cycle will take 8-10 hours, depending on the final temperature and whether the Decanter is kept running.

Once the desired temperature has been reached, as evidenced by the thermometer next to the discharge valve, switch off the burners, connect the discharge hose and open the discharge valve. To assist the initial flow, it is recommended to heat the discharge valve with an LPG or diesel torch.

Operational Requirements

Single-phase electric power for the diesel burners and a drum of diesel fuel. Two workers are required to feed the bags in. Lifting the bag loads is usually done with a forklift with extended forks, a truck-crane arm, or a small mobile crane.

Tips for Safe Operation

1. The removable top hatch has water drainage ducts on both sides; however, during heavy rain, the ducts may be unable to cope with the flow. Cover the hatch with a tarp; always check for water before filling the tank.
2. To avoid corrosion, place the decanter concrete blocks, one on each corner, of sufficient height to prevent flooding.
3. Always empty the bitumen hose after discharge to avoid blockage.

Key Features:

  • Capacity: 60000L / (15850 US Gallons) 13198 Gallons Imp. 
  • High Payload Capacity: 60 MT (metric tonnes) loading capacity
  • 40FT ISO Bitucontainer Tank Design CSC Approved
  • Static Storage use or Intermodal
  • Bunded - Double Wall - Double Skin
  • Design temp. -40 °C up-to +200 °C / -40 °F up-to +392 °F
  • Flame Tube Design (direct fire) Option: thermal-oil heating
  • 3" and 4" outlet Bottom Discharge 100MM Ball valve includes 3" outlet with 3inch Cam-Lock coupling (male) & dust cap
  • Heavy Insulated 50mm~150mm where possible
  • Approvals by Lloyd's Register, the Netherlands

BITUMEN BAG DECANTER - BITUMEN BOX CONTAINER - BITUTANK - BITUCONTAINER

CAPACITY 60000-Litre / 60MT LOAD CAPACITY - TYPE: 40RT

12192mm x 2438mm x 2591mm, 0.55 bar test pressure, double-skin (bunded) and highly insulated, baffled, flame-tube type (direct fire), re-heating by LPG gas burner or diesel burner.

NOMINAL 60CBM VOLUME - LLOYDS REGISTER APPROVAL - SEA - ROAD AND RAIL TRANSPORT

Dimensions:
  Metric Imperial
Nominal Capacity Tank 60000 LTR (15850 US GALLONS) 13198 GALLONS
Maximum Gross Weight 70000 KG 154323 LBS
Tare 10000 KG 22046 LBS
Construction:
Working Pressure 0.30 bar 4,35 psi
Test Pressure 0.55 bar 7,98 psi
Relief Valve Set Pressure 0.32 bar / -0.21 bar/vac 4,64 psi / -3 vac/psi
Bursting Disc Setting 0.35 bar 5,08 psi / -3 vac/psi
 
Ambient Temp. Range -20 °C to +65 °C -20 °F up-to +149 °F
Maximum Cargo Temp 200 °C 392 °F
Shell Material Anti-corrosive CORTEN-A Steel SPA-H, B480, 3,0mm Double Wall Outer Corrugated 1,6mm
Design Code / Approvals BS ISO668, ISO830, ISO1161, ISO1496-4(1991), CSC(2014), ISO6346, LRCCS(2014), TIR(1975), UIC(2010),
Standard Fittings:
Man lid/Hatch Cover Special hatch for big bags 1MT ~ 1,2MT and 500mm (20") diameter, 6-point fixing, 14mm x 12mm seal, located center.
Calibration Volumetric chart, nominal capacity 60,000 liters available.
Airline / Vapor 40MM (11⁄2") ball valve, outlet 11⁄2" BSP, s/s screw cap.
Relief Valve 65MM (21⁄2") high flow flanged, operating pressure 0,22 bar. Capacity: 8710m3/hr.
Bursting Disc DN80 (3") 0.35 bar (32 psi) setting.
Top Inlet Blanked weld-in flange drilled 6 M12 holes @ 168 pcd, provision for optional fitting of 80mm (3") stainless steel butterfly valve. DN80, ASA 150 bolted blank flange outlet, 80mm (3") removable full-length siphon tube.
Bottom Discharge Guard stainless steel 100MM 4" Ball valve - Outlet 3" BSP Flange with 3" Camlock Couplings and 3" Dust Cap.
Gaskets & Seals Parts in contact with cargo, PTFE/Teflon.
Flame Tube Heating Two (2) sets DN200 Φ159x6.0mm, Φ219x6.0mm, Burner Connections, incl. 2x protection sleeves inside the main flame tube.
Insulation 50MM (2") inorganic Rockwool (CFC free); Thermal Conductivity: ≤ 0.044 w/(m2.k), Bottom Insulation 150MM (6")
 
Document Holder / Earth It is fitted at the rear end and is suitable for shipping documents, MSDS, etc. Earth is located at the rear.
Data Plate / Markings Stainless steel data plate detailing specifications fitted rear end.
Frame The Bitumen Bag Decanter container frame shall be mainly composed of an inner box-type tank for bitumen, internal heating pipes, insulation, and nozzles, two (2) end frames, two (2) top side rails, two (2) bottom side rails, two (2) sidewalls and eight (8) corner fittings.
Ladder They are integrated at the front end.
Temperature Gauge Analog gauge fitted at the rear end: -20 °C to +300 °C. / -4 °F to +572 °F.
Sensor Socket 1/2" BSP fitted rear end
Color RAL 9005 or custom

Actual measurements and specifications may vary and are subject to confirmation. 
Tank containers are supplied in accordance with the manufacturer's (Danteco Industries BV) general trading terms and conditions.

Related Products

20FT Offshore Tank DNV 2.7-1

20FT Offshore Tank DNV 2.7-1

Danteco offers T11 Type 20FT Offshore Tank Containers in various capacities for sale and rental. International s...

Show More
10FT Offshore Tank DNV 2.7-1

10FT Offshore Tank DNV 2.7-1

Danteco offers T11 Type 10FT Offshore Tank Containers in various capacities. Offshore Chemical Tank Containers a...

Show More
45FT Bitumen Storage Tank Stationary

45FT Bitumen Storage Tank Stationary

Danteco Industries BV offers a new-build stationary bitumen storage tank with a capacity of 80,000 liters for sa...

Show More
20FT Bitumentank Rebuild

20FT Bitumentank Rebuild

Since 2000, Danteco has been modifying standard T-code Show More