| Stock | Upon request |
| ISO Size | 20FT ISO - 6058mm x 2438mm x 2591mm |
| Material Tank Body | Stainless Steel 304 - Rubber Lined |
Approvals by Lloyd's Register, the Netherlands
Approved by international statutory authorities for the safe transportation of liquid hazardous cargoes and products
The Journey of a T14 Rubber-Lined Tank Container
At Danteco Industries, we specialize in high-quality tank containers engineered for the most demanding chemical transport challenges. The T14 rubber-lined tank container is truly a workhorse.
Imagine a chemical plant in Germany preparing to ship highly corrosive sulfuric acid. A standard stainless-steel tank won’t suffice—this potent liquid would quickly erode the metal. Instead, the T14 rubber-lined tank container features a durable 3-5 mm rubber lining that provides an ideal barrier against corrosion.
Once filled, the container begins its journey. From rail to road and onto a container ship, it seamlessly travels across borders, adhering to IMDG, ADR, and RID safety standards. Weeks later, it arrives at a mining operation in Africa, where the acid is used for ore processing. The tank is then thoroughly cleaned, inspected, and prepared for its next mission because reliability is paramount at Danteco.
Our T14 rubber-lined tank containers ensure a safe, efficient, and compliant transport solution wherever your cargo needs to go.
| Dimensions: | ||
| Metric | Imperial | |
| Capacity | 21000 LTR | 4616 Gallons - 5547 US Gallons |
| Maximum Gross Weight | 36000 KG | 79365 LBS |
| Tare | 3740 KG | 8245 LBS |
| Construction: | ||
| Working Pressure | 4.0 bar | 58 psi |
| Test Pressure | 6.0 bar | 87 psi |
| Steam Working Pressure | N/A not fitted | N/A |
| Steam Test Pressure | N/A | N/A |
| Relief Valve Set Pressure | 4.4 bar | 63 psi |
| Ambient Temp. Range | -40°C to +65°C | -40°F to +149°F |
| Maximum Cargo Temp | 100°C | 212°F |
| Shell Material | Stainless steel, ASTM A240 304 Hot rolled shell. | |
| Design Code / Approvals | ASME, Section VIII, Division 1 (NCS) where applicable and IMDG/ADR/RID/US DOT(CFR49), UN PortableT14, RID/ADR-L4DH, UIC, CTC, CSC ISO 1496/3, TIR, TC | |
| Standard Fittings: | ||
| Manlid | 500mm (20") diameter, open to 135°, 8-point fixing. The cover and manhole neck ring are rubber-lined, the same as the tank; the neck ring is fitted with long hinge brackets suitable for rubber lining. | |
| Calibration | Volumetric stainless steel chart. | |
| Airline / Vapour | PFA Lined Flanged 40mm (1½") ball valve from Guard, outlet 1½ " BSP, stainless steel screw cap. | |
| Relief Valve | 2,5" (DN65) Flanged, Guard high flow, operating pressure 4.4 bar, with adaptor flange fitted with PTFE Lined Rupture disc and Pressure gauge. | |
| Top Outlet | PFA Lined Flanged DN80 Ball valve, weld-in flange drilled 4 M16 holes @ 160 pcd, DN80, 80mm (3") removable full-length syphon tube. | |
| Bottom Discharge | Not fitted. | |
| Remote Closure | Not fitted. | |
| Gaskets & Seals | Parts in contact with cargo, PTFE/Teflon/Rubber | |
| Steam Heating | N/A | |
| Insulation | 50mm (2") total comprising 50mm mineral wool 55 kg/m3 (CFC free) semi-rigid stiffened at top and covered by 1.8mm glass reinforced plastic over barrel and overlap joints sealed. | |
| Compartment | Open stainless steel rubber lind spill compartments with provision for optional lids. | |
| Document Holder / Earth | 75x325mm Fitted at the rear end, suitable for shipping papers, MSDS, etc. The Earth is located at the rear. | |
| Data Plate / Markings | Data Plate / Markings. | |
| Walkway | Aluminum width 475mm "B" Type with access to top fittings, extending to the front end. Provision for an optional handrail. A ladder at the rear RHS (rear-hand side) | |
Temperature Gauge | 80mm dia dual scale -20°C to 200°C / 0 to 400°F. | |
Actual measurements and specifications may vary and are subject to confirmation.
Tank containers are supplied per the manufacturer's (Danteco Industries BV) general trading terms and conditions.
Nitric Acid UN 2031 is a component to produce ammonium nitrate, a major component of fertilizers. It is als...
Show More
The Danteco 40FT Bitumen Bag Decanter, also named big bag bitumen melting machine, bitumen collecting container ...
Show More
Guard Technology Co. Ltd. China.
We supply almost any tank container part you need from our Guard Europe BV w...
The Danteco Bitumen Bag Decanter, also named big bag bitumen melting machine and bitumen melter. Via direct-fire...
Show More© COPYRIGHT 2025 - DANTECO INDUSTRIES BV