|ISO Size||20FT ISO - 6058mm x 2438mm x 2591mm|
|Material Tank Body||Mild / Carbon Steel|
Approvals by Lloyd's Register, the Netherlands
Danteco 20FT ISO T4 Double Wall Diesel Tank Containers are approved by international statutory authorities for the safe transportation of Diesel Fuel UN1202 and Kerosene oil products. Danteco supplies 25,200-litre, 20FT ISO, and 20FT HC diesel fuel tank containers. Our ISO diesel tank container is separated into five purposes, tank containers for diesel storage, deep sea shipping, short sea, road trucking, and rail transportation. Danteco Tank units are of the highest quality design and construction and conform strictly to the latest international approvals.
Danteco supplies 25,200-litre 20FT ISO and ISO 20FT HC diesel fuel tank containers, single-wall and double-wall skin. Our diesel tank containers are separated for five purposes: tank containers for diesel storage, short-sea, deep-sea shipping, trucking, and rail transportation. All Danteco tanks have the highest quality design and construction and conform strictly to the latest international approvals.
Please note that in certain exceptional cases, the containers operated by Danteco may have specifications that differ from the descriptions above.
Also, cargo in the container must conform to the dimensional regulations and laws stipulated by the host country; thus, payload capacity may be affected. For more information or assistance, please contact our customer service.
Year manufactured: "new build."
|Capacity||25200 LTR||5543 US GALLONS|
|Maximum Gross Weight||30480 KG||67196 LBS|
|Tare||5950 KG||13118 LBS|
|Working Pressure||1.75 bar||25 psi|
|Test Pressure||2.65 bar||39 psi|
|Relief Valve Set Pressure||2.2 bar / -0.21 bar/vac.||32 psi / -3 vac./psi|
|Ambient Temp. Range||-40°C up-to +130°C||-40°F up-to +266°F|
|Maximum Cargo Temp||130°C||266°F|
|Shell Material||Mild Steel Q345D-GB/T1591-2008, 6,0 mm shell, 8,0 mm dish ends, the head is not less than 7,0 mm after forming.|
|Design Code / Approvals||ASME, section VIII, division 1 where applicable, and IMDG T3, DOT UK, USDOT, UIC, IMO2, FRA, CSC, ADR, RID, CTC Transport Canada|
|Man-lid||Guard brand 500mm (20") diameter, 6 point fixing, 14mm x 12mm seal, located center|
|Calibration||volumetric chart, nominal capacity 25,000 liters available|
|Airline / Vapor||Guard brand 40MM (1½") ball valve, outlet 1½" BSP, s/s screw cap.|
|Relief Valve||Guard brand 65MM (2½") high flow flanged, operating pressure 2,2 bar. Capacity: 8710m3/hr.|
|Top Inlet||Blanked weld-in flange drilled 6 M12 holes @ 168 pcd, provision for optional fitting of 80mm (3") stainless steel butterfly valve. DN80, ASA 150 bolted blank flange outlet, 80mm (3") with dust cap|
|Bottom Discharge||Guard brand 100MM 4" ball valve - Outlet 3" BSP Flange with 3" Cam-Lock Coupling and Dust-Cap.|
|Gaskets & Seals||Parts in contact with cargo, PTFE/Teflon.|
|Insulation||N/A of upon request|
|Document Holder / Earth||The fitted rear end is suitable for shipping documents, MSDS, etc. The Earth is located at the rear.|
|Data Plate / Markings||Stainless steel data plate detailing specifications fitted rear end.|
|Frame||The container frame shall be mainly composed of two (2) end frames, two (2) barrel supports, two (2) top side rails, two (2) bottom side rails, four (4) tank supports, and eight (8) corner fittings.|
|Walkway||400MM-wide non-slip steel. One longitudinal walkway and three short transverse walkways at the front and rear and adjacent to the rear of the manhole’s spill-box. Aluminum walkways|
|Handrail||(Optional) Intergraded at the top rail|
|Temperature Gauge||Analog gauge fitted rear end: -20°C to +150°C. / -4°F to +266°F|
|RAL Color / Paint Exterior||9010 - White or Custom Color|
Actual measurements and specifications may vary and are subject to confirmation.
Tank containers are supplied per the manufacturer's (Danteco Industries BV) general trading terms and conditions.
Since 2000, Danteco has been modifying standard T-code ISO tank containers to rebuild bitumen tanks in Rotterdam...Show More
Danteco offers a full range of 20FT T11, 14 till 26,000-litre ISO Tank Containers. All tanks have the highest qu...Show More
The Danteco Bitumen Bag Decanter, also named big bag bitumen melting machine and bitumen melter. Via direct-fire...Show More
© COPYRIGHT 2022 - DANTECO INDUSTRIES BV