SPECIALISTS IN TANK CONTAINERS
20FT Diesel Tank Container 20FT Diesel Tank Container 20FT Diesel Tank Container 20FT Diesel Tank Container 20FT Diesel Tank Container
Stock Upon request
ISO Size 20FT ISO - 6058mm x 2438mm x 2591mm
Material Tank Body Stainless Steel 316L

Danteco 20FT ISO T11 Diesel Tank Containers are approved by international statutory authorities for the safe transportation of Diesel Fuel UN1202 and Kerosene oil products. Danteco supplies 26,000 liters volume stainless steel 20FT ISO diesel fuel tank containers. Our ISO diesel tank container is separated into five purposes, tank containers for diesel storage, deep sea shipping, short sea, road trucking, and rail transportation. Danteco Tank units are of the highest quality design and construction and conform strictly to the latest international approvals.

Danteco supplies 26,000-litre 20FT ISO diesel fuel tank containers, single-wall, and double-wall skin. Our diesel tank containers are separated for five purposes: tank containers for diesel storage, short-sea, deep-sea shipping, trucking, and rail transportation. All Danteco tanks have the highest quality design and construction and conform strictly to the latest international approvals.

Please note that in certain exceptional cases, the containers operated by Danteco may have specifications that differ from the descriptions above.

Also, cargo in the container must conform to the dimensional regulations and laws stipulated by the host country; thus, payload capacity may be affected. For more information or assistance, please contact our customer service. 

  • Capacity: 26000L / 5719 Gallons (6868 US Gallons)
  • 20FT ISO Frame
  • Full Frame Design
  • UN Portable T11 Code Design
  • Top Loading Point
  • Bottom Cabinet Stainless steel
  • TIR covers
  • DN80/100 Bottom Discharge
  • Approvals by Lloyds Register, the Netherlands.

DIESEL TANK 20FT ISO: 26000-Litre UN Portable Tank T11

Year manufactured: "new build."

Dimensions:
  Metric Imperial
Capacity 26000 LTR 5719 GALLONS (6869 US Gallons)
Maximum Gross Weight 30480 KG 67196 LBS
Tare 5950 KG 13118 LBS
Construction:   
Working Pressure 1.75 bar 25 psi
Test Pressure 2.65 bar 39 psi
Relief Valve Set Pressure 2.2 bar / -0.21 bar/vac. 32 psi / -3 vac./psi
 
Ambient Temp. Range -40°C up-to +130°C -40°F up-to +266°F
Maximum Cargo Temp 130°C 266°F
Shell Material Mild Steel Q345D-GB/T1591-2008, 6,0 mm shell, 8,0 mm dish ends, the head is not less than 7,0 mm after forming.
Design Code / Approvals ASME, section VIII, division 1 where applicable, and IMDG T11, DOT UK, USDOT, UIC, IMO2, FRA, CSC, ADR, RID, CTC Transport Canada
Standard Fittings:
Man-lid Guard brand 500mm (20") diameter, 6 point fixing, 14mm x 12mm seal, located center
Calibration volumetric chart, nominal capacity 26,000 liters available
Airline / Vapor Guard brand 40MM (1½") ball valve, outlet 1½" BSP, s/s screw cap. 
Relief Valve Guard brand 65MM (2½") high flow flanged, operating pressure 2,2 bar. Capacity: 8710m3/hr.
Top Inlet Blanked weld-in flange drilled 6 M12 holes @ 168 pcd, provision for optional fitting of 80mm (3") stainless steel butterfly valve. DN80, ASA 150 bolted blank flange outlet, 80mm (3") with dust cap
Bottom Discharge Guard 80MM swing foot bottom valve ball valve - Outlet 3" BSP Flange with 3" Cam-Lock Coupling and Dust-Cap.
Gaskets & Seals Parts in contact with cargo, PTFE/Teflon.
Insulation N/A of upon request
Document Holder / Earth The fitted rear end is suitable for shipping documents, MSDS, etc. The Earth is located at the rear.
Data Plate / Markings Stainless steel data plate detailing specifications fitted rear end.
Frame The container frame shall be mainly composed of two (2) end frames, two (2) barrel supports, two (2) top side rails, two (2) bottom side rails, four (4) tank supports, and eight (8) corner fittings.
Walkway 400MM-wide non-slip steel. One longitudinal walkway and three short transverse walkways at the front and rear and adjacent to the rear of the manhole’s spill-box. Aluminum walkways
Handrail (Optional) Intergraded at the top rail
Temperature Gauge Analog gauge fitted rear end: -20°C to +150°C.  /  -4°F to +266°F
RAL Color / Paint Exterior 9010 - White, Custom Color, or Two Tone

Actual measurements and specifications may vary and are subject to confirmation. 
Tank containers are supplied per the manufacturer's (Danteco Industries BV) general trading terms and conditions.

Related Products

T50 Gas Tank Container

T50 Gas Tank Container

For Propane, LPG, and Anhydrous Ammonia, Danteco offers a full range with various pressure ratings of new and us...

Show More
ISO Powder Tank Container

ISO Powder Tank Container

International statutory authorities approve the pneumatic-operated cement tank with the danteco aeration system ...

Show More
20FT Nitric Acid Tank Container

20FT Nitric Acid Tank Container

Nitric Acid UN 2031 is a component to produce ammonium nitrate, a major component of fertilizers. It is als...

Show More
20FT Bitumentank Rebuild

20FT Bitumentank Rebuild

Since 2000, Danteco has been modifying standard T-code ISO tank containers to rebuild bitumen tanks in Rotterdam...

Show More